La Crosse Technology WS-8117U-IT-C Manual

La Crosse Technology Ur WS-8117U-IT-C

Læs gratis den danske manual til La Crosse Technology WS-8117U-IT-C (9 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om La Crosse Technology WS-8117U-IT-C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

INSTANT TRANSMISSION is the state-of-the-art

new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate update

(every 4 seconds!) of all your outdoor data

measured from the transmitters: follow your

climatic variations in real-time!

WS-8117U-IT

ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE

AND MOON PHASE

Instruction Manual

FEATURES:

ATOMIC CLOCK:

LCD2

display

Battery cover

Function keys

LCD1

display

Hanging holes

Foldable stand

This product offers:

Holder

• WWVB Radio controlled time with manual time setting

• 12/24 hour time display

• Time display: hour, minute, second

• Alarm setting with snooze function

• Calendar display

• Weekday display (4 languages to choose from: English, French, Spanish, and German)

• Time zone setting

• Daylight savings time ON/OFF option (DST)

• ºC or ºF temperature display selectable

• Indoor temperature display

• Outdoor temperature display via 915MHz transmission

• Wall mount or freestanding

• Current moon phase display

OUTDOOR TEMPERATURE SENSOR:

• Remote transmission of outdoor temperature to the

atomic clock by 915 MHz signals

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK

The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow

the steps below:

1. Insert finger or other solid object in the space at the bottom center of the battery

compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking inside battery compartment).

3. Replace compartment cover.

DO NOT SET THE CLOCK.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR

The sensor uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the

steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking inside battery compartment).

3. Replace the battery cover on the unit.

Alkaline batteries are recommended for use in both units. Avoid using rechargeable

batteries.

SETTING UP:

Alkaline batteries are recommended for use in both units. Avoid using

rechargeable batteries.

NOTE: Do not set the clock until the outdoor temperature is displayed.

1. Place batteries in the outdoor sensor first, then into the atomic clock. DO NOT PRESS

ANY BUTTONS FOR 10 MINUTES.

2. Once the batteries are in place, all segments of the LCD will light up briefly. Following the

indoor temperature, date, weekday, and the time as 12:00 will be displayed. If they are not

shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds

before reinserting them. Once the indoor data is displayed user may proceed to the next

step.

3. After the batteries are inserted, the atomic clock will start receiving data signal from the

sensor. The outdoor temperature should then be displayed on the atomic clock. If this does

not happen after 2 minutes, the batteries will need to be removed from both units and reset

from step 1 and the signal reception icon is no longer shown.

Note:

In the event of changing batteries of the unit ensure that the batteries do not spring free from the

contacts. Always wait at least 10 minutes after removing the batteries before reinserting,

otherwise start up and transmission problems may occur.

FUNCTION KEYS

The atomic clock has four easy to use keys:

SET key : To enter into the set mode for the following functions: time zone, DST ON/OFF

(daylight saving time), language, hour, minute, year, month, day, weekday,

12/24 hour, ºC or ºF temperature display

Weekday

Indoor temperature

+ key : To toggle between the second, temperature or weekday display

To change any values in manual set mode

ALM key : To enter into the alarm set mode

To display the alarm time in normal mode display

To set the alarm ON/OFF

SNZ key : To activate the snooze function during alarm

To exit the setting modes

ATOMIC CLOCK LCD SCREEN DESCRIPTIONS

The atomic clock's LCD is divided into 2 sections and once the batteries are inserted, all the

segments will light up briefly before displaying the information for time, date, indoor and outdoor

temperatures.

MANUAL SETTINGS

Note:

If the atomic clock has already successfully received the WWVB time signal and displays

the correct time and date, then the Manual settings can be skipped.

After completion of the above described procedures in “Setting up” the manual setting modes

can be entered by pressing and holding the SET key for 3 seconds. The following settings can

now be programmed:

• Time zone setting

• DST ON/OFF

• Language display setting

• Manual time setting

Date

Outdoor temperature display

WWVB time

Radio rece

tion icon

Alarm icon

Low battery indicator (atomic clock)

Low battery indicator (sensor)

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Ur
Model:	WS-8117U-IT-C
Type:	Atomisk vægur
Bredde:	310 mm
Dybde:	30 mm
Højde:	203 mm
Produktfarve:	Brun
Batterispænding:	1.5 V
Formfaktor:	Firkant
Termometer:	Ja
Batteritype:	AA
Vækkeur:	Ja
Antal understøttede batterier:	2
Hygrometer:	Ingen