La Crosse Technology WS-9029U-IT-CAMO Manual

La Crosse Technology Vejrstation WS-9029U-IT-CAMO

Læs gratis den danske manual til La Crosse Technology WS-9029U-IT-CAMO (2 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om La Crosse Technology WS-9029U-IT-CAMO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

WS- -9029U IT www.lacrossetechnology.com/support Page | 1

Model: WS- - 9029U IT

Instruction Manual

DC: 011515

WIRELESS TEMPERATURE STATION

Setup with Multiple Sensors

Observe correct polarity when inserting batteries. Note: When only using one sensor, use steps 1, 2 and 5.

Step 1: Insert 2 fresh AA, LR6 1.5 volt batteries into sensor 1.

Step 2: Insert 2 fresh AA, LR6 1.5 volt batteries into the temperature station

Step 3: When outdoor temperature appears, insert 2 fresh AA, LR6 1.5 volt batteries into sensor 2

Step 4: When channel 2 appears, insert 2 fresh AA, LR6 1.5 volt batteries into sensor 3

Step 5: Keep the temperature station and all sensors together for 15 minutes. All three sensors should be displayed in the

first minute.

Restart: If the outdoor temperature is not displayed after 3 minutes, remove batteries from the wireless temperature station & all

outdoor sensors. Press any button on the wireless temperature station 20 times. After 15 minutes, return to above. Step 1

Outdoor Temperature Reception Icon/Channel Indicator

 The outdoor temperature reception icon will flash every second when searching for the sensor.

 Once connected, once every 4 seconds when outdoor temperature update is received.

 The channel indicator will show below the reception icon.

 Press the button to view sensors on other channels. CH

Note: Channel 1 will not show if only one sensor is connected.

Set Time, Date, Temperature Units, Forecast Sensitivity

1. Press and hold the SET/CH button for 5 seconds.

2. “12h” or “24h” will ash in the TIME section of the LCD. Press and release the MIN/MAX/+ button to select 12/24 hour time.

3. Press and release the /CH button once. SET

4. The will ash. Press and release the MIN/MAX/+ button to advance the hours. hour

5. Press and release the SET/CH button once more, and the will ash. Press and release the MIN/MAX/+ button to minutes

advance the minutes.

6. Press and release the SET/CH button to conrm selections and exit.

Note: Selecting 12 hour time will automatically select Fahrenheit (°F) temperature.

Selecting 24 hour time will automatically select Celsius (°C) temperature

Battery

compartment

2 “AA” batteries

TX29U-IT

Temperature

Sensor

Manual Set

Time

Indoor

Temperature +

Humidity

Outdoor

Temperature +

Reception

Icon

Channel

Indicator

Battery

compartment

2 “AA” batteries

Low Battery Indicator

MIN/MAX Indicator

Wall Hang Hole

Base Stand

Buttons

Outdoor

Reception

Icon

Outdoor

Channel

Icon

WS- -9029U IT www.lacrossetechnology.com/support Page | 2

View/Reset MIN/MAX Values

The temperature station shows MIN/MAX temperatures.

 Press the button view minimum, maximum then current temperature readings. MIN/MAX/+ to

 Hold the button to reset temperature readings to current. MIN/MAX/+ all

Low Battery Icon

Low battery icon indicates low battery for station or sensor.

 If the TX icon is displayed, replace batteries in the outdoor sensor.

 If the RX icon is displayed, replace batteries in the temperature station.

Position Outdoor Sensor

 - Mount the outdoor sensor on a north facing wall or in any well shaded area. Under an eave or deck rail is preferred.

 The maximum transmitting range to the wireless temperature station is over 330 feet (100 meters) in open air, not including walls.

Specifications Care and Maintenance

Temperature measuring range:

Indoor:

14.1 F to 139.8 F (9.9°C to 59.8°C) 

Outdoor:

- - 39.8 F to 139.8 F (  39.8°C to 59.8°C)

Indoor relative humidity range:

1% to 99%

Indoor checking interval:

Every 15 seconds.

Outdoor checking interval:

Every 4 seconds.

Transmission Range:

330 feet (in open space).

Power Supply:

Weather Station:

2 x AA, IEC LR6, 1.5V.

Temperature Sensor:

2 x AA, IEC LR6, 1.5V.

Battery life cycle:

Approximately 24 months.

Recommended battery type:

Alkaline.

Dimensions (L x W x H)

Weather Station

2.91” x 1.15” x 3.86” (74 x 29.1 x 98mm).

Temperature Sensor:

1.44” x 0.76” x 4.80”

(36.6 x 19.3 x 121.8mm)

Warranty and Support Information

La Crosse Technology, Ltd. provides a 1 year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. -

Before returning a product, please contact our friendly customer support with questions or visit our online help (manuals and FAQS):

Phone: Online Product Support: 1 1610-608-782- www.lacrossetechnology.com/support

Product Registration: www.lacrossetechnology.com/support/register View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf

Warranty Address: Protected under U.S. Patents: 5,978,738 | 6,076,044 |RE43903

La Crosse Technology, Ltd

2830 S. 26th St.

La Crosse, WI 54601

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

This device must not be co located or operating in conjunction with any other antenna or transmitter. -Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority

to operate the equipment.

written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent