La Crosse Technology WT-3122A Manual

La Crosse Technology Ur WT-3122A

Læs gratis den danske manual til La Crosse Technology WT-3122A (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 11 anmeldelser. Har du et spørgsmål om La Crosse Technology WT-3122A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

12.5 Inch Atomic Wall Clock

Model: WT-3122A

DC: 052518

For information about WWVB, atomic time signal visit:

http://bit.ly/AtomicTime

• Always purchase the correct size and grade of battery most

suitable for intended use.

• Clean the battery contacts and also those of your clock prior

to battery installation.

• Ensure the battery is installed with correct polarity (+ and -).

• Remove battery from your clock when it is not used for an

extended period of time.

• Promptly remove an expired battery.

CARE AND MAINTENANCE

Battery Requirements: 1 AA (IEC LR6) required in movement

(Alkaline recommended)

Battery life: 1 battery; over 12 months

SPECIFICATIONS

La Crosse Technology, Ltd. provides a 1-year limited time

warranty (from date of purchase) on this product relating to

manufacturing defects in materials & workmanship.

Before returning a product, please contact our friendly

customer support with questions or visit our online help.

Phone: 1-608-782-1610

Online: www.lacrossetechnology.com/support/

WARRANTY AND SUPPORT

Page | 1Page | 4

WARNING: This product can expose you to chemicals including

styrene, which is known in the State of California to cause cancer.

For more information go to: https://www.p65warnings.ca.gov/

POWER UP

1. Select Time Zone and DST ON or OFF.

2. Insert 1 AA battery into your clock.

3. For best reception, place your clock on a wall that faces

Ft. Collins, Colorado. During the night, your clock will set itself.

IMPORTANT:

• Hands will move to 12:00 and search for the atomic time

signal.

• After 8-10 minutes if no atomic time signal is received, the

clock will start running from 12:00.

• Your clock will continue to search for the WWVB atomic time

signal.

• Allow up to 5 nights for the clock to receive the atomic time

signal.

SET

RESET

WAVE (Atomic search)

Battery

Time Zone Selector

Daylight Saving Time

Selector

Set Time:

1. Hold SET for 3 seconds

2. Press and Hold SET to move hands quickly.

3. Press and release SET to move hands forward step by step.

Reset:

If the clock does not respond when trying to manually set your

time, press the RESET button on the movement case.

MANUALLY SET TIME

• In certain areas, your clock may not be able to receive

the atomic time signal due to signal strength or interference.

• In this case, your clock can be set manually and operate as

a quartz clock until the WWVB signal can be received.

Note: The atomic time signal will override manual settings.

product support, and awesome giveaways.

LET’S BE SOCIAL!

Page | 3Page | 2

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Ur
Model:	WT-3122A
Type:	Mekanisk ur
Produktfarve:	Træ
Formfaktor:	Cirkel
Diameter:	317.5 mm
Batteritype:	AA
Antal understøttede batterier:	1
Understøttet placering:	Væg