La Crosse WS6827 Manual

La Crosse Vejrstation WS6827

Læs gratis den danske manual til La Crosse WS6827 (4 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om La Crosse WS6827, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

The Wireless Color Forecast Station features manual set time, date,

weather forecast, indoor and outdoor temperature/humidity, with

temperature alerts, and heat index and dew point, on a stylish, colorful,

and easy to read display. Use the integrated USB charging port to

charge your smartphone, camera or other device when the forecast

station operates on A/C power. Wireless transmission range of over 90

meters (300 feet) in open air, from transmitter to forecast station.

WIRELESS COLOR FORECAST STATION

THIS STATION LEARNS

Please allow 3-4 days for barometer calibration to generate an

accurate forecast.

SETUP INSTRUCTIONS STEP BY STEP

STEP 1:

 Insert the 5-volt A/C power adapter

into the designated area on the

back of the forecast station.

 Plug the A/C power adapter into a

wall outlet for continuous backlight

(ON/OFF), and dimmer feature.

STEP 2: (optional battery operation)

 Remove battery cover from the forecast station: slide tab down and

pull out to remove the cover.

 Insert 3 NEW AAA batteries (not included) into the back of the

forecast station. Observe the correct polarity (see marking inside the

battery compartment).

 The forecast station will light up and show, indoor temperature,

humidity and time.

 (Press and release the HAUT/BAS/OFF button to illuminate the

backlight for 8 seconds when using only battery power.)

STEP 3:

 Ensure that the transmitter is within 3 meters (10 feet) of the forecast

station.

 Remove battery cover from transmitter: Slide the battery cover down

and lift off the front.

 Insert 2 NEW AA batteries (not included) into the

transmitter. Observe the correct polarity.

 Within 3 minutes, the forecast station will show

readings in the Outdoor temperature area on the LCD.

Note: Use Alkaline batteries (or Lithium for temperatures

below -28.8°C/- 20°F ).

TRANSMITTER SIGNAL STRENGTH

 After the batteries are inserted, the forecast station will search for the

outdoor temperature/humidity transmitter for 3 minutes.

 The antenna symbol will flash during reception, and temperature

display will be dashes “---“.

 The antenna symbol will scroll during transmitter synchronization.

 If synchronization fails once, the antenna will lose one bar.

 If synchronization fails twice, the antenna will lose two bars.

 If reception continuously fails to receive 5 times, the antenna symbol

will be shown as .

 The antenna will show full display with successful RF

(radio frequency) reception.

TROUBLESHOOTING

 If the outdoor temperature is not displayed after three minutes, hold

the RECHERCHE CAPTEUR button on the forecast station for three

seconds to search for outdoor transmitter.

 Next, remove the battery cover from the transmitter then press the TX

button to send a signal.

 If it still does not receive the outdoor temperature, remove the A/C

cord and batteries from both the forecast station and the transmitter

for 15 minutes repeat setup instructions from step 1.

TIME/DATE

The REGLAGES button moves through the program menu and confirm

settings.

Use the button to increase a value.

Use the button to decrease a value.

SET TIME/DATE

Hold the REGLAGES button for three seconds to enter time set mode.

 BEEP ON/OFF: BP ON (BEEP) will flash .The default is ON .Press

and release the arrow button to ON or OFF the BEEP button sound.

 LANGUAGE: The language will flash. The default is FR. Use the

arrow buttons to select the language for weekday display (French,

Italian, Dutch, Spanish, Danish, English or German) and press the

REGLAGES button to confirm and move to 12/24 hour.

 12/24-HOUR: The time format will flash. Use the ARROW buttons to

choose 12-hour or 24-hour time format and press the REGLAGES

button to confirm and move to hour.

 HOUR: The Hour will flash. Use the ARROW buttons to choose the

hour, and press the REGLAGES button to confirm and move to

minutes.

 MINUTES: The Minutes will flash. Use the ARROW buttons to

choose the minutes, and press the REGLAGES button to confirm and

move to the year.

 YEAR: The Year will flash. Use the ARROW buttons to choose the

year, and press the REGLAGES button to confirm and move to the

month.

Wireless Color Forecast Station

WS6827 | Quick Setup Guide

 MONTH: The Month will flash. Use the ARROW buttons to choose

the month, and press the REGLAGES button to confirm and move to

the date.

 DATE: The Date will flash. Use the ARROW buttons to choose the

date, and press the REGLAGES button to confirm and move to

Fahrenheit/Celsius.

 CELSIUS /FAHRENHEIT: °C or °F will flash. Use the ARROW

buttons to select Celsius or Fahrenheit. Press and release the

REGLAGES button to confirm and exit the program menu.

Note:

 Up/down arrows: Press once to adjust by 1 unit, hold for fast scroll

adjustment.

 When in setting mode of any feature, all the rest of the information of

the LCD should disappear, only concentrate in the setting of the

feature

 Press the HAUT/BAS/OFF button at any time to exit or wait 20

seconds without pressing buttons to return to the normal time display.

ALARM TIME

The ALARME DE REVEIL button moves through the alarm set mode

and confirms settings.

Use the ARROW button to increase a value.

Use the ARROW button to decrease a value.

SET ALARM TIME

From normal time and temperature display mode, press and release the

ALARME DE REVEIL button once to show alarm time. Hold the

ALARME DE REVEIL button for three seconds to enter alarm set mode.

 HOUR: The Hour will flash. Use the ARROW buttons to set the hour,

and press ALARME DE REVEIL button to confirm and switch to

minutes.

 MINUTES: The Minutes will flash. Use the ARROW buttons to set the

minutes, Press and release the ALARME DE REVEIL button to exit.

ACTIVATE/DEACTIVATE TIME ALARM

 In normal mode, press and release the ALARME DE REVEIL button

once to show alarm time.

 Press and release the ALARME DE REVEIL button repeatedly to

activate or deactivate the Alarm. The alarm icon appears when

alarm is activated.

Note: The alarm will ring for 2 minutes then turn off if no buttons are

pressed.

SNOOZE ALARM

 When the alarm sounds, press the HAUT/BAS/OFF button to snooze

the alarm for 10 minutes. The alarm icon flashes when the snooze

feature is active. The alarm icon will flash while the snooze feature

is active.

 To stop alarm for one day, press any button but not HAUT/BAS/OFF

button, while in snooze mode. The alarm icon will show solid.

Note: Alarm is crescendo sound. When the alarm sounds, it continues

for 2 minute and then shuts off completely.

BACKLIGHT

Operating on A/C adapter, the backlight is on continuously when

operating the forecast station with the 5-volt A/C adapter.

Note: When the adapter is NOT in use, the HAUT/BAS/OFF light feature

is not available.

 HAUT: The backlight is defaulted to high (= haut) at setup when the

Adapter is in use.

 BAS: Press and release the HAUT/BAS/OFF button to dim the

backlight.

 OFF: Press and release the HAUT/BAS/OFF button again to turn the

backlight off. Press and release the HAUT/BAS/OFF button again to

return to full strength.

Note: When the backlight is off, press any button to activate the

backlight for 10 seconds.

Operating on battery power only, press and release the any button

and the backlight will show for 10 seconds.

TEMPERATURE TREND ICONS

The indoor and outdoor temperature trend indicators will update every

30 minutes or less. These trends represent temperature changes over

the past three hours.

Temperature rising more than 1°C /2°F in the past three hours.

Temperature has not changed more than 1°C /2°F in the past

three hours.

Temperature falling more than 1°C / 2°F in the past three

hours.

HUMIDITY TREND ICONS

The indoor and outdoor humidity trend indicators will update every 30

minutes or less. These trends represent humidity changes over the past

three hours.

Temperature rising more than 3% in the past three hours.

Temperature has not changed more than 3% in the past three

hours.

Temperature falling more than 3% in the past three hours

USB CHARGE PORT

The integrated USB charging port (on front) will charge your smart

phone, camera or other devices when the forecast station is plugged

into a power outlet with the included 5V A/C adapter.

Note:

 This is a power-output charging port. The charging port does not

supply power to the forecast station.

 You cannot charge mobile devices when operating the clock on

battery power.

 Begin charging your external device by connecting the device’s USB

charging cable (not included) to the USB charging port on the front of

the forecast station. Charging times will vary.

 Some USB cables are for data transfer only and cannot be used for

charging. Make sure that the USB cable you use will charge your

device. Most USB cables included with mobile devices will work for

charging.

 USB Power Output: 1A maximum current. Do NOT overload USB

port. Charge 1A devices or less only

HEAT INDEX & DEW POINT TEMPERATURE

HEAT INDEX

Heat Index combines the effects of heat and humidity. It is the apparent

temperature of how hot it feels to a human being. As humidity increases,

the body is unable to cool effectively. The temperature will feel warmer.

View Heat Index: From normal time and temperature display mode,

press the CHALEUR/PT ROSEE button once and Heat Index will show

instead of the outdoor ambient temperature.

Note: Heat index will be the same number as the temperature until the

outdoor temperature is above 26.7°C (80°F).

DEW POINT TEMPERATURE

Dew Point Temperature is the saturation point of the air, or the

temperature to which the air has to cool in order to create condensation.

The higher the dew points, the higher the moisture content of the air at a

given temperature.

Produkt Specifikationer

Mærke:	La Crosse
Kategori:	Vejrstation
Model:	WS6827

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse WS6827 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation La Crosse Manualer

La Crosse WS-8010U Manual

23 August 2024

La Crosse WS-9635 U-IT-CA Manual

22 August 2024

La Crosse Heavy Weather Pro software Manual

21 August 2024

La Crosse WS9130 Manual

21 August 2024

La Crosse WS-1501 Manual

20 August 2024

La Crosse WS-9662U-IT CA Manual

17 August 2024

La Crosse WS-1510-IT Manual

16 August 2024

La Crosse WM9280 Manual

16 August 2024

La Crosse WS-2812-IT Manual

16 August 2024

La Crosse WS-9151U Manual

15 August 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Emos E8610 Manual

15 August 2025

Eurochron EFWS 5500 Manual

15 August 2025

Eurochron EFS 3110A Manual

15 August 2025

MOOOV 477538 Manual

13 August 2025

Hyundai WS 2303 Manual

10 August 2025

TFA 30.3039 Manual

8 August 2025

TFA Linea Plus 35.1144.01 Manual

7 August 2025

TFA 98.1111.02 Manual

7 August 2025

TFA 30.3900.02 Manual

7 August 2025

TFA View 35.1142 Manual

7 August 2025