Lancom IAP-1781VAW+ Manual

Lancom Router IAP-1781VAW+

Læs gratis den danske manual til Lancom IAP-1781VAW+ (2 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Lancom IAP-1781VAW+, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may

be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes.

LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. 111858/0619

Please observe the

following when setting

up the device

ADo not rest any objects

on top of the device

ACAUTION! - Device

surface may be hot

during operation

AThis device complies

with the regulations for

devices of protection

class 2 with functional

ground

LANCOM 1681V

Power

VDSL

Online

ETH 1

VPN

TH 3

ETH 4

Hardware

Power supply Internal power supply (100-240 V, 50-60 Hz)

Power consumption Max. ca. 14 W

Environment Temperature range -25–70 °C, humidity 0–95 %, non-condensing

Housing Robust metal housing, protection class IP 54, dimensions 250x158x55 mm (HxWxD)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces

WAN: VDSL2

AVDSL2 as per ITU G.993.2; proles 8a, 8b, 8c, 8d, 12a, 12b, 17a

ACompatible to VDSL2 from Deutsche Telekom AG (only over ISDN)

AADSL conformity according to:

ADSL2+ over ISDN as per ITU G.992.5 Annex B /J with DPBO (POTS: Annex A/Annex M),

ADSL2 over ISDN as per ITU G.992.3 Annex B (POTS: Annex A/L),

ADSL over ISDN as per ITU G.992.1 Annex B (POTS: Annex A)

ASupports just one virtual connection at a time in ATM (VPI-VCI pair)

ETH 2 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode. 1 port

can be operated as additional WAN ports. Ethernet ports can be electrically disabled in the LCOS

conguration.

ISDN Internal (NT) ISDN S

bus

Ant 1, Ant 2 Two NJ connectors for external LANCOM AirLancer antennas or for antennas from other vendors.

Please respect the restrictions which apply in your country when setting up an antenna system. For

information about calculating the correct antenna setup, please refer to

www.lancom-systems.com.

WAN protocols

VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP),

RIP-1, RIP-2, VLAN, GRE, EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack

session), IP(v6)oE (autoconguration, DHCPv6 or static)

ISDN 1TR6, DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD

Declaration of Conformity

Hereby, LANCOM Systems declares that this radio equipment is in compliance with Directive 2014/53/EU. The full text of the

EU declaration of conformity is available at the following internet address: www.lancom-systems.com/ce/

Package contents

Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Cables 1 Ethernet cable, 3m; 1 DSL cable, 3 m; ISDN cable, 3m; 1 power cord, 3m

Accessories 1 wall mount kit, 1 reset magnet

This product contains separate open-source software components which are subject to their own licenses, in particular the

General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s WEBcong

interface under “Extras > License information“. If the respective license demands, the source les for the corresponding

software components will be made available on a download server upon request.

g Power

Off Device switched off

Green, permanently* Device operational,

resp. device paired / claimed and LANCOM

Management Cloud (LMC) accessible

Green / orange, blinking Conguration password not set. Without a

conguration password, the conguration

data in the device is unprotected.

Red, blinking Charge or time limit reached

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

device not claimed

2x green inverse

blinking*

Pairing error, resp.

LMC activation code not available

3x green inverse

blinking*

LMC not accessible, resp.

communication error

f VPN

Off VPN connection not active

Green, permanently VPN connection active

Green, ashing VPN connection establishment

a ETH1 / ETH2

Off No network device connected

Green, permanently Network device connected, no data trafc

Green, ickering Data transmission

d ISDN

Off Interface disabled

Green, permanently D-channel active

Orange, permanently B-channel active

Green, blinking ISDN connection active

Orange, blinking ISDN connection establishment

Red / orange, blinking ISDN hardware error

e VoIP

Off No SIP accounts dened or VCM disabled

Green, permanently All dened and active SIP accounts

(outgoing) have been successfully

registered

Red, permanently Not all dened and active SIP accounts

have been registered

(possibly still in process)

Red or green,

inversely ashing

Number of currently used lines

(connecting or connected)

S E T T I N G U P A N D C O N N E C T I N G T H E D E V I C E

T E C H N I C A L D A T A

c WLAN

Off No Wi-Fi network dened or Wi-Fi module

deactivated. The Wi-Fi module is not

transmitting beacons.

Green, permanently At least one Wi-Fi network is dened and

Wi-Fi module activated. The Wi-Fi module

is transmitting beacons.

Green, inverse ashing Number of ashes = number of connected

Wi-Fi stations and P2P wireless connec-

tions, followed by a pause (default).

Alternatively the frequency of the ashing

can indicate signal strength over the

dened P2P link or the signal strength

between the access point and the device

operating in client mode.

Green, blinking DFS scanning or other scan procedure

LANCOM IAP-1781VAW+

Quick Reference Guide

C ud eadylo -r

Ethernet interface

Connect the interfaces (ETH 1) or a

(ETH 2) with the included network b

cable to your PC or a LAN switch.

VDSL- / ADSL interface

Use the supplied DSL cable for the

IP-based line to connect the VDSL

interface and the provider’s telephone

socket. (For more information, please

contact your Internet service provider.)

ISDN interface

Connect the internal (NT) ISDN bus

with the included cable to an ISDN

phone or an ISDN phone system.

Membrane seal

Only to be opened by a service technician

Wi-Fi antennas

Connect the Wi-Fi antennas (not included) to

the N connectors Ant 1 and Ant 2. e f

Depending on how the antennas are to be

used, ‘Antenna Grouping’ may need to be

congured in order to provide the desired

MIMO behavior.

Power

Supply power to the device via the power

connector.

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is congured to be managed by the LANCOM

Management Cloud.

The device is designed for protection category IP54 and thus protected all-around against splash water and dust in harmful quantity.

The device has to be installed in sufciently protected environment, so that no direct weathering can occur.

When working with separately purchased antennas, please ensure you do not exceed the maximum permissible transmission power. The system operator is

responsible for adhering to the threshold values.

Antennas are only to be attached or changed when the device is switched off. Mounting or demounting antennas with the device switched on may cause the

destruction of the Wi-Fi module!

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!