LD Systems STINGER 8 G3 WMB 1 Manual

LD Systems Højttaler STINGER 8 G3 WMB 1

Læs gratis den danske manual til LD Systems STINGER 8 G3 WMB 1 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om LD Systems STINGER 8 G3 WMB 1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Adam Hall GmbH · Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when mounting the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_LD_SYSTEMS.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable
economic activity.
LDEB82AG3WMB1 (SUITABLE FOR LDEB82AG3)
1. Remove four M4 screws A on the back of the speaker in the positions for fastening the adapter plate. Ensure that the
cutouts for the LINE OUT jack and POWER switch are correctly positioned. Attach the adapter plate to the speaker with the
supplied M4 screws so that the LINE OUT jack and POWER switch are freely accessible.
2. Slightly loosen bolt E on the wall bracket (do not remove), loosen and remove bolt D from the tilt & swivel arm, remove
it and lift the U-bracket B from its mounting. Attach the U-bracket B to the rear of the adapter plate with the supplied nuts.
3. Using screws, attach mounting plate C vertically in a suitable position to a solid wall with its flat side and safety eyelet
facing upwards (4 screws). Use suitable screws and plugs etc. to ensure secure mounting.
4. Now slide the speaker with the attached U-bracket B into the bracket on the wall, reinstall bolt D into its designated
position and secure it with the previously removed nut.
5. The speaker can be tilted vertically by slightly loosening nut E, adjusting to the desired angle and then re-tightening the
nut. The speaker can be adjusted horizontally by loosening nut F (remove plastic cap beforehand), adjusting the angle as
required, and then re-tightening the nut.
LDEB82G3WMB1 (SUITABLE FOR LDEB82G3)
1. Remove the two M6 screws A on the back of the speaker.
2. Slightly loosen bolt E on the wall bracket (do not remove), loosen and remove bolt D from the tilt & swivel arm, remove
it and lift the U-bracket B from its mounting. Attach the U-bracket B to the rear of the speaker with the supplied screws.
3. Using screws, attach mounting plate C vertically in a suitable position to a solid wall with its flat side and safety eyelet
facing upwards (4 screws). Use suitable screws and plugs etc. to ensure secure mounting.
4. Now slide the speaker with the attached U-bracket B into the bracket on the wall, reinstall bolt D into its designated
position and secure it with the previously removed nut.
5. The speaker can be tilted vertically by slightly loosening nut E, adjusting to the desired angle and then re-tightening the
nut. The speaker can be adjusted horizontally by loosening nut F (remove plastic cap beforehand), adjusting the angle as
required, and then re-tightening the nut.
SPECIFICATIONS
EN
For further instructions, please check out the detailed online manual in the download area of this product at:: www.ld-systems.com
Model name: LDEB82G3WMB1 LDEB82AG3WMB1
Type: PA Loudspeaker Accessories PA Loudspeaker Accessories
Part: Wall Mount Bracket Wall Mount Bracket
Suitable for: LDEB82G3 LDEB82AG3
Material: Steel Steel
Surface: Powder Coated Powder Coated
Colour: Black Black
Max. Load 12 kg 11 kg
Dimensions (W x H x D): 100mm x 157mm x 109mm 130mm x 157mm x 122mm
Weight: 1.3 kg 1.6 kg
A
A
USER´S MANUAL
STINGER® 8 A G3 WMB 1
TILT & SWIVEL WALL MOUNT FOR STINGER® 8 A G3 MODELS

Produkt Specifikationer

Mærke: LD Systems
Kategori: Højttaler
Model: STINGER 8 G3 WMB 1

Har du brug for hjælp?

Hvis du har brug for hjælp til LD Systems STINGER 8 G3 WMB 1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler LD Systems Manualer

LD Systems

LD Systems MIX 6 A G3 Manual

27 November 2025
LD Systems

LD Systems MAUI 28 G3 MIX Manual

17 September 2025
LD Systems

LD Systems MAUI 11 G3 MIX Manual

16 September 2025
LD Systems

LD Systems ANNY 10 Manual

9 September 2025
LD Systems

LD Systems ANNY 10 BPH B5 Manual

29 August 2025
LD Systems

LD Systems ANNY 10 BPH2 B5.1 Manual

29 August 2025
LD Systems

LD Systems ANNY 10 BPH 2 B5 Manual

29 August 2025
LD Systems

LD Systems ANNY 10 BPH 2 B8 Manual

29 August 2025
LD Systems

LD Systems ANNY 10 BPH B4.7 Manual

29 August 2025
LD Systems

LD Systems ANNY 10 HBH 2 B6 Manual

29 August 2025

Højttaler Manualer

Nyeste Højttaler Manualer

JBL

JBL 8128 Manual

7 December 2025
FiiO

FiiO SP5 Manual

7 December 2025
Fostex

Fostex PA-3 Manual

7 December 2025
Fostex

Fostex YK88-Sol2 Manual

7 December 2025
Fostex

Fostex FS-4AS Manual

7 December 2025
JBL

JBL MTC-81BB8 Manual

7 December 2025
Morel

Morel IP-VWB25.4 Manual

6 December 2025
Fostex

Fostex NF06 Manual

6 December 2025
Morel

Morel Kinetic KS124 Manual

6 December 2025
Fostex

Fostex PT20K Manual

6 December 2025