LD Systems STINGER G3 WMB 1 Manual

LD Systems Højttaler STINGER G3 WMB 1

Læs gratis den danske manual til LD Systems STINGER G3 WMB 1 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om LD Systems STINGER G3 WMB 1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany

Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com

USER´S MANUAL LDEB(102)G3WMB1

Tilt and Swivel wall mount

SAFTY INFORMATION

1. Please read these instructions carefully before you start installation and assembly.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.

5. Be attentive when mounting the product and protect yourself from injury.

6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.

7. Do not modify this equipment.

8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate

plastic and paper/cardboard.

9. Plastic bags must be kept out of reach of children.

10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY

You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adamhall.com/media/

pdf/Manufacturers-Declarations-LDSYSTEMS_DE_EN_ES_FR.pdf

To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Anspach

/ Email Info@adamhall.com / 49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be

treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste

disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable

economic activity.

LDEB102G3WMB1 (SUITABLE FOR LDEB102G3, LDEB102AG3)

LDEBG3WMB1 (SUITABLE FOR LDEB122G3, LDEB122AG3, LDEB152G3, LDEB152AG3)

1. Remove the four M6 screws A on the back of the speaker.

2. Slightly loosen bolt E of the wall bracket (do not remove), loosen and remove bolt D from the tilt & swivel

arm, remove and lift the U-bracket with mounting plate B from its mounting. Attach the U-bracket with

mounting plate B to the rear of the speaker with the supplied screws.

3. Using screws, attach mounting plate C vertically in a suitable position to a solid wall with its ﬂat side and

safety eyelet facing upwards (4 screws LDEB102G3WMB1 / 8 screws LDEBG3WMB1). Use suitable screws

and plugs etc. to ensure secure mounting.

4. Now slide the speaker with the attached U-bracket with mounting plate B into the bracket on the wall,

reinstall bolt D into its designated position and secure it with the previously removed nut.

5. The speaker can be tilted vertically by slightly loosening nut E, adjusting to the desired angle and then

re-tightening the nut. The speaker can be adjusted horizontally by loosening nut F (remove plastic cap before-

hand), adjusting the angle as required, and then re-tightening the nut.

SPECIFICATIONS

For further instructions, please check out the detailed online manual in the download area of this product at:: www.ld-systems.com

Model name: LDEB102G3WMB1 LDEBG3WMB1

Type: PA Loudspeaker Accessories PA Loudspeaker Accessories

Part: Wall Mount Bracket Wall Mount Bracket

Suitable for: LDEB102G3, LDEB102AG3 LDEB122G3, LDEB122AG3

LDEB152G3, LDEB152AG3

Material: Steel Steel

Surface: Powder Coated Powder Coated

Colour: Black Black

Max. Load 20 kg 30 kg

Dimensions (W x H x D): 100mm x 157mm x 160mm 120mm x 220mm x 160mm

Weight: 1.4 kg 1.8 kg

Produkt Specifikationer

Mærke:	LD Systems
Kategori:	Højttaler
Model:	STINGER G3 WMB 1

Har du brug for hjælp?

Hvis du har brug for hjælp til LD Systems STINGER G3 WMB 1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler LD Systems Manualer

LD Systems MAUI 28 G3 MIX Manual

17 September 2025

LD Systems MAUI 11 G3 MIX Manual

16 September 2025

LD Systems ANNY 10 Manual

9 September 2025

LD Systems ANNY 10 BPH B5 Manual

29 August 2025

LD Systems ANNY 10 BPH2 B5.1 Manual

29 August 2025

LD Systems ANNY 10 BPH 2 B5 Manual

29 August 2025

LD Systems ANNY 10 BPH 2 B8 Manual

29 August 2025

LD Systems ANNY 10 BPH B4.7 Manual

29 August 2025

LD Systems ANNY 10 HBH 2 B6 Manual

29 August 2025

LD Systems ANNY 10 HBH 2 B5.1 Manual

29 August 2025

Højttaler Manualer

Nyeste Højttaler Manualer

RetroSound R-507N Manual

29 Oktober 2025

TDK TP6803BLK Manual

28 Oktober 2025

TDK TREK Flex A28 Manual

28 Oktober 2025

Altec Lansing inMotion iM4 Manual

24 Oktober 2025

Vonyx VX822 Manual

21 Oktober 2025

Memphis Audio SRX42 Manual

19 Oktober 2025

Memphis Audio MS62 Manual

19 Oktober 2025

Madison MAD-CENTER120 Manual

19 Oktober 2025

Goji Mini GMINIG17 Manual

19 Oktober 2025

Audison VOCE AV 12 Manual

19 Oktober 2025