LG 29FU6TL Manual

LG televisión 29FU6TL

Læs gratis den danske manual til LG 29FU6TL (8 sider) i kategorien televisión. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om LG 29FU6TL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

OWNER’S MANUAL

Colour Television

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this infor-

mation to your dealer when you require service.

Model number :

Serial number :

P/NO : MFL66681001-EN (CW91D)(1007-REV00)

www.lg.com

Power

This set operates on an AC mains supply, the volt-

age is as indicated on the label on the back cover.

Never apply DC power to the set. In the event of

thunderstorms or powercuts, please pull out the

aerial and power plug.

Press the button on the front panel or sidePOWER

panel to turn off the TV when the TV set is not being

used for a long time.It is recommended to remove the

plug from the wall outlet(Power point).

Disconnecting device from mains

Mains plug is the disconnecting device. The plug

must remain readily operable

Warning

To prevent fire or shock hazard, do not expose the set

to rain or moisture.

Do not place anything containing liquid on top of the set,

this may cause a fire or could give an electric shock.

Service

Never remove the back cover of the set as this can

expose you to very high voltage and other hazards. If

the set does not operate properly, unplug it and call

your dealer.

Aerial

Connect the aerial cable to the socket on the back

cover. For the best reception an outdoor aerial

should be used.

Location

Position your set so that no bright light or sunlight

falls directly onto the screen. Care should be

taken not to expose the set to any unnecessary

vibration, moisture, dust or heat. Also ensure that

the set is placed in a position to allow a free ow

of air. Do not cover the ventilation openings on the

back cover.

Installation

Connection of external equipment

Aerial socket

1. Connect the RF out socket of the VCR to the

aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in

socket of the VCR.

3. Store the VCR channel on a desired pro-

gramme number using the ‘Auto programme

tuning’ section.

4. Select the programme number where the

VCR channel is stored.

5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR

to audio/video in sockets of the set and in sock-

ets of the VCR to RF OUT sockets of the set.

2. If the VCR is connected to the AV sockets on the

set, press the TV/AV button to select AV1 or

AV2(option).

3. Press the PLAY button on the VCR.The VCR

playback picture appears on the screen.

You can also record programmes received by the

TV on video tape via audio/video out sockets.

Note :

If you have a mono VCR, connect the audio cable

from the VCR to the socket ofAUDIO L/MONO

the set.

And if connected to AV2(option),then you should

select L+L mode by pressing the I/II/*(option) key.

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to

the Euro scart socket of the set.

2. Press the PLAY button on the VCR.

If your VCR outputs a switching voltage when

connected to Euro scart socket, the set will

switch to AV 1 mode automatically. But if you

want to keep on watching TV mode, press the

/ E

or NUMBER buttons.Otherwise press

the TV/AV button on the remote control

handset to select AV 1 The VCR playback pic-

ture appears on the screen.

You can also record programmes received by the

TV on video tape.

Note : Signal type RGB, i.e. the signals red, green

and blue can only be selected for the Euro scart

socket. These signals are transmitted, for exam-

ple, by a pay TV decoder, game machine or photo

CD unit, etc.

Component in sockets (option)

1. Connect the COMPONENT video output

sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the

COMPONENT (480i) to the COMPONENT

INPUT sockets (Y P P ) on the set.B R

2. Connect the audio cable from the COMPO-

NENT to AUDIO IN sockets of AV IN1.

3. Press the TV/AV button to select COMPO-

NENT.

4. Press the PLAY button on the COMPONENT.

The COMPONENT playback picture appears

on the screen.

Produkt Specifikationer

Mærke:	LG
Kategori:	televisión
Model:	29FU6TL

Har du brug for hjælp?

Hvis du har brug for hjælp til LG 29FU6TL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

televisión LG Manualer

LG OLED55C54LA Manual

3 April 2025

LG OLED65G56LS Manual

3 April 2025

LG OLED77G55LW Manual

3 April 2025

LG OLED42C55LA Manual

3 April 2025

LG 75QNED87 Manual

3 April 2025

LG OLED77C54LA Manual

1 April 2025

LG OLED55C56LB Manual

1 April 2025

LG OLED77T4PUA Manual

1 April 2025

LG 43QNED81TSA Manual

10 Marts 2025

LG 86QNED99T Manual

20 Februar 2025

televisión Manualer

Nyeste televisión Manualer

Panasonic Viera TX-L32D28 Manual

9 April 2025

Panasonic TX-L24C5B Manual

9 April 2025

Panasonic TX-24E302B Manual

9 April 2025

Panasonic TX-26LX62FA Manual

9 April 2025

Panasonic TX-24CS500B Manual

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025

9 April 2025