Liebherr EKB 9671 Manual

Liebherr Køleskab EKB 9671

Læs gratis den danske manual til Liebherr EKB 9671 (20 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Liebherr EKB 9671, eller vil du spørge andre brugere om produktet?

Side 1/20
Assembly Instructions
Door stop 90°
HC / HCB / ECN / ECBN
Largedoor
Montageanleitung
Tür Öffnungsbegrenzer 90°
HC / HCB / ECN / ECBN
Largedoor
Seite 5
7083 631-01
Door stop 90°
MF / MRB / MCB / MW / EGN / EKB /
ECBN / EWT
page 09
Montageanleitung
Tür Öffnungsbegrenzer 90°
MF / MRB / MCB / MW / EGN / EKB /
ECBN / EWT
Seite 13
2
PLEASE READ AND FOLLOW THESE
INSTRUCTIONS
These instructions contain Warning statements.
Always read and follow all Warning statements!
WARNING
Warning indicates a potentially hazard-
ous situation which, if not avoided, could
result in death or serious injury.
IMPORTANT
This highlights information that is especially
relevant to a problem-free installation.
Installing the door stop pins
Installing the door stop pins may only be done by a
trained expert.
The procedure requires two people.
1.
1.
Open the refrigerator door.
Release the spring tension of the top and bottom hinge
by turning the indicated screw counterclockwise.
There are the numbers 1 and stamped on the hinge.0
In the tensioned state the screw is in the 1 position.
During turning, the screw moves to the right.
It requires 8 full turns (360°) until the screw is in the 0
position and the hinge is released completely.
WARNING
Do not try to install the door stop pins
without tension release of both hinges.
Failure to release the tension may cause
the hinge to snap shut without warning
and can cause serious injury.


Produkt Specifikationer

Mærke: Liebherr
Kategori: Køleskab
Model: EKB 9671

Har du brug for hjælp?

Hvis du har brug for hjælp til Liebherr EKB 9671 stil et spørgsmål nedenfor, og andre brugere vil svare dig