Livarno Lux IAN 67216 Manual

Livarno Lux Ikke kategoriseret IAN 67216

Læs gratis den danske manual til Livarno Lux IAN 67216 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Livarno Lux IAN 67216, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

DISCO BALL LDL 9 A1

These operating instructions are a component of the Disco Ball LDL 9 A1 and

provide you with important information on the intended use, safety, connection

and operation of the Disco Ball. Read these operating instructions carefully be-

fore using the appliance for the ﬁ rst time and preserve them for later reference.

Pass them on, with the appliance, to any future owner.

Intended use

This Disco Ball is intended exclusively for decorative purposes in a private house-

hold. This appliance is not intended for illumination purposes, for commercial or

industrial applications or for use outdoors. This appliance is not intended for any

other use or for uses beyond those mentioned, and they could lead to damage.

The manufacturer assumes no responsibility for damage caused by failure to

observe the instructions, improper use, inappropriate repairs, making unauthorized

changes or for using unapproved replacement parts.

Safety instructions

For safe handling of the appliance, observe the following safety information:

Connect the power adapter only to a correctly installed mains power socket ■

whose voltage matches that given in the technical speciﬁ cations of the adapter.

The mains power plug must always be easily accessible, so that in the event ■

of an emergency the appliance can be quickly disconnected from the mains

power supply.

Ensure that neither the Disco Ball nor the power adapter come into contact ■

with water or other liquids. There is a risk of electric shock! Use the Disco-

ball only in dry indoor areas, not outdoors.

Immediately disconnect the power adapter from the mains power socket if ■

the Disco Ball does not function faultlessly or there is visible damage to the

power adapter. Then arrange for the appliance to be checked by Customer

Services.

After use or during extended absences, ALWAYS remove the power adapter ■

from the mains power socket. Otherwise, the power adapter remains “live”

for as long as it continues to be connected to the mains power socket. Thus

it also consumes energy.

Use only the supplied power adapter (Model: QM-2301206-IP20), other ■

models are possibly not suﬃ ciently safe or are unsuitable for the Disco Ball.

When the Disco Ball is in use, ensure that it hangs completely free and will ■

not be blocked or covered by anything. This would lead to a build-up of heat.

DO NOT hang the Disco Ball over inﬂ ammable objects, especially not over ■

decorations, curtains or drapes. This would increase the risk of ﬁ re!

Lay the cable from the power adapter to the Disco Ball such that no one can ■

trip over it and/or that the Disco Ball can be pulled down.

This appliance is not intended for use by individuals (including children) ■

with restricted physical, physiological or intellectual abilities or deﬁ ciences

in experience and/or knowledge unless they are supervised by a person

responsible for their safety or receive from this person instruction in how the

appliance is to be used. Children should be supervised to ensure that they

do not play with the appliance.

Technical data

Power supply unit QM-2301206-IP20

Input 230 V ~ 50 Hz, 50 mA

Output 12 V ~ , max. 500 mA

Protection Class II /

Disco Ball LDL 9 A1

Ball diameter approx. 20 cm

Weight approx. 830 g (incl. power adapter)

Operating

temperature + 5°C – + 40°C

Items supplied

Before taking the appliance into use, check that all items are complete/available

and free of visible damage. If the contents are incomplete or are damaged due

to defective packaging or transportation, contact the Service Hotline (see the

chapter “Warranty and Service”). Remove all packaging material from the

appliance.

Disco Ball ▯

Power supply unit ▯

3 Screws ▯

3 Plugs ▯

4 Adhesive tapes with spare mirrors (20 pieces) ▯

This operating manual ▯

Operation

Completely unwind the cable of the power adapter. ▯

Insert the connection plug of the power adapter into the connection socket ▯

on the Disco Ball, then insert the plug of the power adapter into a mains

power socket.

The Disco Ball begins to slowly rotate and it is illuminated by the coloured ▯

LEDs in the ceiling mount.

To turn the Disco Ball oﬀ , remove the power adapter from the mains power ▯

socket.

Assembling the ceiling mount

CAUTION

Check to ensure that no pipes or electric cables are located at the drilling ►

site. There is a risk of electric shock!

In cases of frequent use, it is sensible to aﬃ x the Disco Ball ﬁ rmly to the ceiling.

If you only want to use the Disco Ball occasionally, you can fold out the bracket

on the ceiling mount and hang it from a hook.

Fixed installation (see Fig. 1)

Hold the ceiling bracket at the location where you wish to install the Disco ▯

Ball, and mark the three drilling holes.

Drill the holes for the plugs. ▯

Attach the ceiling bracket to the ceiling with the plugs and screws. ▯

Hanging by the bracket (see Fig. 2)

If you want to secure the Disco Ball with a hook, mark a drilling hole. ▯

Drill the hole for the plug.

Screw the hook (not supplied) into the plug. ▯

Fold out the bracket on the ceiling mount and hang the Disco Ball up from it. ▯

If you want to hang the Disco Ball from a pre-situated hook, ensure that the ▯

hook has suﬃ cient capacity to bear the weight. Additionally, ensure that the

Disco Ball can rotate without hindrance.

If possible, also attach the cable of the power adapter to the ceiling so that ▯

it does not hang down onto the rotating Disco Ball.

Fig. 1: Assembly of the ceiling bracket with plugs

Fig. 2: Assembly of the ceiling bracket with a hook

Cleaning and care

CAUTION

First, disconnect the power adapter from the mains power socket and the ►

connector plug from the connector socket. Failure to do so brings with it

the risk of a potentially fatal electric shock should you come into contact

with electrical parts, or if moisture permeates the appliance.

Use a soft and lint-free cloth for cleaning. ▯

Do not use aggressive or abrasive cleansers, they could damage the plastic ▯

surfaces.

The Disco Ball is maintenance free.

Store the Disco Ball in a dry environment.

Disposal

Do not dispose of the appliance in your normal

domestic waste. This product is subject to the provisions

of European Directive 2002/96/EC.

Dispose of the appliance through an approved disposal centre or

at your community waste disposal facility. Observe the currently

applicable regulations. In case of doubt, please contact your

waste disposal centre.

Dispose of all packaging materials in an environmentally friendly

manner.

Warranty and Service

You receive a 3-year warranty for this appliance as of the purchase date.

This appliance has been manufactured with care and meticulously examined

before delivery. Please retain your receipt as proof of purchase. In the case of

a warranty claim, please make contact by telephone with our service depart-

ment. Only in this way can a post-free despatch for your goods be assured.

The warranty is valid only for material or manufacturing defects not, however,

for transport damage, wear and tear or for damage to breakable parts, i.e.

switches or rechargeable batteries. This product is for domestic use only and is

not intended for commercial applications.

In the event of misuse and improper handling, use of force and interference not

carried out by our authorized service branch, the warranty will become void.

Your statutory rights are not restricted in any way by this warranty. The warranty

period will not be extended as a result of repairs eﬀ ected under warranty. This

applies also to replacement and repaired parts. Damage and defects present

at the time of purchase must be reported immediately after unpacking or, at the

very least, two days after date of purchase. Repairs eﬀ ected after expiry of the

warranty period are subject to charge.

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: kompernass@lidl.gb

IAN 67216

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: kompernass@lidl.ie

IAN 67216

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

ID-Nr.: LDL9A1-04/11-V1

- 1 - - 2 - - 3 - - 4 -

Produkt Specifikationer

Mærke:	Livarno Lux
Kategori:	Ikke kategoriseret
Model:	IAN 67216

Har du brug for hjælp?

Hvis du har brug for hjælp til Livarno Lux IAN 67216 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Livarno Lux Manualer

Livarno Lux IAN 446887 Manual

18 September 2025

Livarno Lux IAN 446566 Manual

17 September 2025

Livarno Lux HG08649 Manual

27 August 2025

Livarno Lux IAN 340420 Manual

26 Juli 2025

Livarno Lux HG09112A Manual

25 Juli 2025

Livarno Lux IAN 390529 Manual

25 Juli 2025

Livarno Lux IAN 314897 Manual

25 Juli 2025

Livarno Lux IAN 386591 Manual

25 Juli 2025

Livarno Lux IAN 366424 Manual

25 Juli 2025

Livarno Lux HG08650A Manual

25 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

LG CineBeam PU600U Manual

1 Januar 2026

Samsung MX-E850 Manual

1 Januar 2026

Fulgor Milano F6PTK30BC Manual

1 Januar 2026

SIME Murelle Equipe 220 660 ErP Manual

1 Januar 2026

Tronic TAV 300 A3 Manual

1 Januar 2026

Blaupunkt RVC 3.0 HD Manual

1 Januar 2026

Samsung AQ24JAN Manual

1 Januar 2026

Kohler K-7637 Manual

1 Januar 2026

NUX Analog Delay AD-3 Manual

1 Januar 2026

Yamazen ONG-65R Manual

1 Januar 2026