Makita 3601B Manual

Makita Fræsningsmaskine 3601B

Læs gratis den danske manual til Makita 3601B (12 sider) i kategorien Fræsningsmaskine. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Makita 3601B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Router

3601B

005038

ENGLISH (Original instructions)

SPECIFICATIONS

Model 3601B

Collet chuck capacity 12 mm or 1/2"

No load speed (min

-1 ) 23,000 or 26,000 (See Nameplate on the tool)

Overall height 190 mm

Net weight 3.6 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE010-1

Intended use

The tool is intended for flush trimming and profiling of

wood, plastic and similar materials.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 93 dB(A)

Sound power level (L

WA) : 104 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG223-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : cuttig grooves in MDF

Vibration emission (ah) : 3.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-13

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Route

Model No./ Type: 3601B

are of series production and

Conforms to the following European Directives:

98/37/EC until 28th December 2009 and then with

2006/42/EC from 29th December 2009

And are manufactured in accordance with the following

standards or standardised documents:

Produkt Specifikationer

Mærke:	Makita
Kategori:	Fræsningsmaskine
Model:	3601B

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita 3601B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fræsningsmaskine Makita Manualer

Makita RP2300FCX Manual

5 August 2023

Makita RP1110CJ Manual

7 Maj 2023

Makita M3601 Manual

24 Marts 2023

Makita DRT50ZJX2 Manual

16 December 2022

Makita DCO180ZJ Manual

27 November 2022

Makita 3601B Manual

21 November 2022

Makita RP1800F Manual

8 November 2022

Makita SG1250 Manual

4 November 2022

Makita RP2300FC Manual

28 Oktober 2022

Makita M3700 Manual

21 Oktober 2022

Fræsningsmaskine Manualer

Nyeste Fræsningsmaskine Manualer

31 Maj 2025

31 Maj 2025

31 Maj 2025

29 Juli 2024

Bosch GKF 18V-8 Professional Manual

30 Juni 2024

Proxxon GG12 Manual

17 April 2024

Gardena EH 600/36 Manual

15 Februar 2024

Carat SL-1255 Manual

30 December 2023

Hitachi M8V2 Manual

8 December 2023

DeWalt D26204K Manual

3 December 2023