Makita 5008MGAJ/1 Manual
Makita
savemaskine
5008MGAJ/1
Læs nedenfor 📖 manual på dansk for Makita 5008MGAJ/1 (12 sider) i kategorien savemaskine. Denne guide var nyttig for 31 personer og blev bedømt med 4.7 stjerner i gennemsnit af 16 brugere
Side 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Circular Saw
5008MG
5008MGA
008185
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model 5008MG / 5008MGA
Blade diameter 210 mm
at 90° 75.5 mm
at 45° 57 mm
Max. Cutting depth
at 50° 51.5 mm
No load speed (min
-1) 5,200
Overall length 332 mm
Net weight 5.1 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE078-2
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece. With
appropriate Makita genuine saw blades, other materials
can also be sawed.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.37 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
characteristics.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 89 dB (A)
Sound power level (L
WA) : 100 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting wood
Vibration emission (ah,W
) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : cutting metal
Vibration emission (ah,M) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Produkt Specifikationer
| Mærke: | Makita |
| Kategori: | savemaskine |
| Model: | 5008MGAJ/1 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita 5008MGAJ/1 stil et spørgsmål nedenfor, og andre brugere vil svare dig
savemaskine Makita Manualer
14 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
27 September 2024
14 September 2024
7 September 2024
24 August 2024
21 August 2024
savemaskine Manualer
- savemaskine Bavaria
- savemaskine Spear & Jackson
- savemaskine Einhell Bavaria
- savemaskine CMI
- savemaskine Kompernass
- savemaskine Worx
- savemaskine Bosch
- savemaskine Husqvarna
- savemaskine Evolution
- savemaskine Vonroc
- savemaskine Texas
- savemaskine Luxor
- savemaskine Dremel
- savemaskine Ultranatura
- savemaskine RIKON
Nyeste savemaskine Manualer
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
13 Oktober 2024
12 Oktober 2024
11 Oktober 2024
11 Oktober 2024
9 Oktober 2024
6 Oktober 2024
5 Oktober 2024