Makita 6281DWPE3 Manual

Makita Boremaskine 6281DWPE3

Læs gratis den danske manual til Makita 6281DWPE3 (8 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Makita 6281DWPE3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Driver Drill

6261D

6271D

6281D

6381D

6391D

008685

ENGLISH (Original instructions)

SPECIFICATIONS

Model 6261D 6271D 6281D 6381D 6391D

Steel 10 mm 10 mm 10 mm 13 mm 13 mm

Wood 21 mm 25 mm 25 mm 25 mm 36 mm

Wood screw

5.1 mm x 38 mm

5.1 mm x 63 mm

6 mm x 75 mm

Capacities

Machine screw 6 mm

High 0 - 1,300

No load speed (min

-1) Low 0 - 400

Overall length 192 mm 200 mm 216 mm

Net weight 1.5 kg 1.5 kg 1.6 kg 1.7 kg 2.0 kg

Rated voltage D.C. 9.6 V D.C. 12 V D.C. 14.4 V D.C. 14.4 V D.C.18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-3

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE034-1

Intended use

The tool is intended for drilling and screw driving in wood,

metal and plastic.

ENG103-3

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 70 dB (A) or less

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A)

Wear ear protection

ENG202-3

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Driver Drill

Model No./ Type: 6261D,6271D,6281D,6381D,6391D

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

Standard or standardized documents:

EN60745

The Technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	6281DWPE3
Vægt:	1600 g
Opladningstid:	30 min.
Batterispænding:	14.4 V
Borepatron type:	Nøglefri
Batteriteknologi:	Nikkel-Cadmium (NiCd)
Strømkilde:	Batteri
Numre af batterier medfølger:	3 stk
Omvendt:	Ja
Produktdesign:	Pistolgreb boremaskine
Boring:	Ja
Skruearbejde:	Ja
Batteri medfølger:	Ja
Maksimal torsion (bløde applikationer):	20 Nm
Tomgangshastighed (1. gear):	400 rpm
Tomgangshastighed (2. gear):	1300 rpm
Maksimal torsion (hårde applikationer):	36 Nm