Makita 6413 Manual

Makita Bore-skruemaskiner 6413

Læs gratis den danske manual til Makita 6413 (8 sider) i kategorien Bore-skruemaskiner. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Makita 6413, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Drill

6411

6412

6413

007894

ENGLISH (Original instructions)

SPECIFICATIONS

Model 6411 6412 6413

Steel 10 mm 10 mm 10 mm

Capacities Wood 25 mm 25 mm 25 mm

No load speed (min

-1) 3,400 0 - 3,400 0 - 3,400

Overall length 228 mm 228 mm 234 mm

Net weight 1.3 kg 1.3 kg 1.3 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE032-1

Intended use

The tool is intended for drilling in wood, metal and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model 6412, 6413

Sound pressure level (L

pA) : 82 dB(A)

Sound power level (LWA) : 93 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: drilling into metal

Vibration emission (ah,D) : 3.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-15

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Drill

Model No./ Type: 6412, 6413

are of series production and

Produkt Specifikationer

Mærke:	Makita
Kategori:	Bore-skruemaskiner
Model:	6413
Bredde:	64 mm
Dybde:	234 mm
Højde:	183 mm
Vægt:	1300 g
Borepatron type:	Nøglefri
Indgangseffekt:	450 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	3400 rpm
Kabellængde:	2 m
Bore diameter, stål (maks.):	10 mm
Bore diameter, træ (maks.):	25 mm
Skrue diameter (maks.):	10 mm
Slagboring:	Ingen