Makita 6501 Manual

Makita Bore-skruemaskiner 6501

Læs gratis den danske manual til Makita 6501 (8 sider) i kategorien Bore-skruemaskiner. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Makita 6501, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

High Speed Drill

6501

003002

ENGLISH (Original instructions)

SPECIFICATIONS

Model 6501

Steel 6.5 mm

Capacities Wood 9 mm

No load speed (min

-1) 4,500

Overall length 206 mm

Net weight 0.9 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE032-1

Intended use

The tool is intended for drilling in wood, metal and

plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG104-2

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 77 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

ENG202-3

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-14

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

High Speed Drill

Model No./ Type: 6501

are of series production and

Conforms to the following European Directives:

2006/42/EC

Produkt Specifikationer

Mærke:	Makita
Kategori:	Bore-skruemaskiner
Model:	6501
Vekselstrømsindgangsspænding:	120 V
Dybde:	206 mm
Vægt:	900 g
Borepatron type:	Nøgle
Indgangseffekt:	230 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	4500 rpm
Kabellængde:	2 m
Bore diameter, stål (maks.):	6.5 mm
Bore diameter, træ (maks.):	9 mm