Makita BFR750Z Manual

Makita Boremaskine BFR750Z

Læs gratis den danske manual til Makita BFR750Z (28 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Makita BFR750Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

AVERTISSEMENT:

Pour votre propre sécurité, prière de lire attentivement avant l'utilisation.

GARDER CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

ADVERTENCIA:

Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la

herramienta.

GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.

Cordless Auto Feed Screwdriver

Visseuse à recharge automatique

sans fil

Destornillador inalámbrico con

autoalimentación

BFR540

BFR750

008261

ENGLISH

SPECIFICATIONS

Model BFR540 BFR750

Screw strip

4×25 - 55 (5/32" x 1" x 2-3/16")

4×45 - 75 (5/32" x 1-3/4" x 2-15/16")

No load speed (RPM) 4000 /min.

Overall length 424 mm (16-3/4") 464 mm (18-1/4")

Net weight 2.1 kg (4.6 lbs) 2.3 kg (5.0 lbs)

Rated voltage D.C. 14.4 V D.C. 18 V

Standard battery cartridges BL1430 BL1830

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

GEA002-3

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious injury. The term "power tool" in all of the

warnings listed below refers to your mains-operated

(corded) power tool or battery-operated (cordless) power

tool.

SAVE THESE INSTRUCTIONS.

Work area safety

1. Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

Personal Safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

10. Use safety equipment. Always wear eye

protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

11. Avoid accidental starting. Ensure the switch is

in the off-position before plugging in. Carrying

power tools with your finger on the switch or

plugging in power tools that have the switch on

invites accidents.

12. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

13. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

14. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving

parts.

15. If devices are provided for the connection of

dust extraction and collection facilities,

ensure these are connected and properly used.

Use of these devices can reduce dust-related

hazards.

Power tool use and care

16. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	BFR750Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita BFR750Z stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Boremaskine Makita Manualer

8 September 2025

27 August 2025

26 August 2025

11 August 2025

15 Juli 2025

Makita HR3011FC Manual

9 Juli 2025

Makita DP4021 Manual

8 Juli 2025

Makita HR008G Manual

8 Juli 2025

Makita HK1820L Manual

8 Juli 2025

Makita DP4020 Manual

8 Juli 2025

Boremaskine Manualer

Nyeste Boremaskine Manualer

Hazet 9530-11 Manual

30 September 2025

Bavaria BCD 18 2B Manual

29 September 2025

Bavaria BCD 18 Manual

29 September 2025

Bavaria BCD 14.4 2B Manual

29 September 2025

Bavaria BID 500 E Manual

29 September 2025

Bavaria BID 650 E Manual

29 September 2025

Bavaria BCD 144/2 Manual

29 September 2025

Graphite 58G858 Manual

29 September 2025

NEO Tools 04-723 Manual

28 September 2025

NEO Tools 04-616 Manual

28 September 2025