Makita BFT123FZ Manual
Makita
Skruemaskine
BFT123FZ
Læs gratis den danske manual til Makita BFT123FZ (12 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Makita BFT123FZ, eller vil du spørge andre brugere om produktet?
Side 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Screwdriver
BFT020F
BFT021F
BFT040F
BFT042F
BFT080F
BFT081F
BFT122F
BFT123F
004242
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BFT020F BFT021F BFT040F BFT080F BFT122F BFT042F BFT081F BFT123F
Hard joint
0.5 - 2 N·m 0.5 - 2 N·m
1 - 4 N·m 3 - 8 N·m
5 - 12 N·m
1 - 4 N·m 3 - 8 N·m
5 - 12 N·m
Fastening
torque Soft joint
0.5 - 2 N·m 0.5 - 2 N·m 1 - 3.5 N·m 3 - 6.5 N·m 5 - 10 N·m 1 - 3.5 N·m 3 - 7.5 N·m 5 - 12 N·m
No load speed (min
-1) 540 320 950 540 320 1,200 700 390
200 x 65 x 251mm
(with Battery Cartridge BH9020/BH9020A)
200 x 71 x 242 mm
(with Battery Cartridge BH1220C)
Dimensions 200 x 65 x 274 mm
(with Battery Cartridge BH9033/BH9033A)
200 x 71 x 251 mm
(with Battery Cartridge BH1233C)
Net weight 1.4 kg 1.5 kg
Rated voltage D.C.9.6V D.C.12V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model BFT020F, BFT021F, BFT040F, BFT042F,
BFT080F, BFT081F, BFT122F
Sound pressure level (L
pA) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Model BFT123F
Sound pressure level (L
pA) : 71 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Cd
Ni-MH
Li-ion
Produkt Specifikationer
| Mærke: | Makita |
| Kategori: | Skruemaskine |
| Model: | BFT123FZ |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita BFT123FZ stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skruemaskine Makita Manualer
31 Marts 2025
22 December 2024
22 December 2024
4 Oktober 2024
3 Oktober 2024
2 Oktober 2024
24 September 2024
22 September 2024
20 September 2024
15 September 2024
Skruemaskine Manualer
- Silverline
- Stanley
- SW-Stahl
- Carrera
- Pansam
- Dremel
- Genesis
- Sthor
- Rodcraft
- FERM
- Kawasaki
- DeWalt
- Toolcraft
- Black And Decker
- Craftsman
Nyeste Skruemaskine Manualer
8 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025