Makita DDF485RTJ Manual

Makita Boremaskine DDF485RTJ

Læs gratis den danske manual til Makita DDF485RTJ (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Makita DDF485RTJ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Cordless Driver Drill

DDF485

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DDF485

Drilling capacities 13 mmSteel

Wood 38 mm

Fastening capacities Wood screw 6 mm x 75 mm

Machine screw M6

No load speed High (2) 0 - 1,900 min-1

Low (1) 0 - 500 min-1

Overall length 169 mm

Rated voltage D.C. 18 V

Net weight 1.4 - 1.7 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge

BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B

• Someofthebatterycartridgeslistedabovemaynotbeavailabledependingonyourregionofresidence.

WARNING: Only use the battery cartridges listed above.Useofanyotherbatterycartridgesmaycause

injuryand/orre.

Symbols

Thefollowingshowthesymbolsusedfortheequip-

ment.Besurethatyouunderstandtheirmeaningbefore

use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Donotdisposeofelectricequipmentor

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

EquipmentandBatteriesandAccumulators

and Waste Batteries and Accumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for drilling and screw driving in

wood, metal and plastic.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN60745-2-1:

Sound pressure level (LpA ) : 74 dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745-2-1:

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s2 or less

Uncertainty(K):1.5m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared vibration emission value

mayalsobeusedinapreliminaryassessmentof

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emissionvaluedependingonthewaysinwhichthe

tool is used.

WARNING:Besuretoidentifysafetymeasures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

accountofallpartsoftheoperatingcyclesuchas

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	DDF485RTJ
Bredde:	79 mm
Dybde:	169 mm
Højde:	255 mm
Vægt:	1700 g
Batterispænding:	18 V
Indbygget lys:	Ingen
Borepatron type:	Nøglefri
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Tomgang (min.):	500 rpm
Tomgang (maks.):	1900 rpm
Lydtryksniveau:	74 dB
Justerbar hastighed:	Ja
Produktdesign:	Pistolgreb boremaskine
Borepatron, kæbe breddee (maks.):	13 mm
Torsion indstillinger:	21
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	38 mm
Bore diameter, beton (maks.):	- mm
Justerbart drejningsmoment:	Ja
Boring:	Ja
Skruearbejde:	Ja
Slagboring:	Ja
Borepatron, kæbe bredde (min.):	1.5 mm