Makita DF330DZ Manual

Makita Boremaskine DF330DZ

Læs gratis den danske manual til Makita DF330DZ (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Makita DF330DZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Driver Drill

DF330D

009329

ENGLISH (Original instructions)

SPECIFICATIONS

Model DF330D

Steel 10 mm

Wood 21 mm

Wood screw 5.1 mm x 63 mm

Capacities

Machine screw M6

High (2) 0 - 1,300

No load speed (min-1) Low (1) 0 - 350

Chuck capacity 0.8 mm - 10 mm

Overall length 189 mm

Net weight 1.0 kg

Rated voltage D.C. 10.8 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE034-1

Intended use

The tool is intended for drilling and screw driving in

wood, metal and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (LpA) : 70 dB (A) or less

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	DF330DZ
Vægt:	1000 g
Batterispænding:	10.8 V
Indbygget lys:	Ja
Borepatron type:	Nøglefri
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Bæretaske:	Ja
Lydtryksniveau:	70 dB
Vibrationsudledning:	2.5 m/s²
Usikkerhed i lydniveauet:	3 dB
Produktdesign:	Pistolgreb boremaskine
Usikkerhed - k:	1.5 m/s²
Torsion indstillinger:	18
Bore diameter, stål (maks.):	10 mm
Bore diameter, træ (maks.):	21 mm
Boring:	Ja
Skruearbejde:	Ja
Maksimal torsion (bløde applikationer):	14 Nm
Tomgangshastighed (1. gear):	350 rpm
Tomgangshastighed (2. gear):	1300 rpm
Maksimal torsion (hårde applikationer):	24 Nm