Makita DFL301RZ Manual
Makita
Skruemaskine
DFL301RZ
Læs gratis den danske manual til Makita DFL301RZ (12 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Makita DFL301RZ, eller vil du spørge andre brugere om produktet?
Side 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Angle Screwdriver
BFL201R
BFL301R
BFL402R
007907
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BFL201R BFL301R BFL402R
Hard joint 10 - 20 N • m 16 - 30 N • m 25 - 40 N • m
Fastening torque Soft joint 10 - 20 N • m 16 - 30 N • m 25 - 40 N • m
Square drive 9.5 mm 9.5 mm 9.5 mm
No load speed (min-1) 360 260 200
Dimensions
429 mm x 72 mm x 98 mm 477 mm x 72 mm x 98 mm 477 mm x 72 mm x 98 mm
Net weight 1.7 kg 2.0 kg 2.0 kg
Rated voltage D.C. 14.4 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BFL201R, BFL402R
Sound pressure level (L
pA) : 72 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BFL301R
Sound pressure level (L
pA) : 74 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH003-12
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Screwdrive
r
Cd
Ni-MH
Li-ion
Produkt Specifikationer
| Mærke: | Makita |
| Kategori: | Skruemaskine |
| Model: | DFL301RZ |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita DFL301RZ stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skruemaskine Makita Manualer
31 Marts 2025
22 December 2024
22 December 2024
4 Oktober 2024
3 Oktober 2024
2 Oktober 2024
24 September 2024
22 September 2024
20 September 2024
15 September 2024
Skruemaskine Manualer
- Wiha
- Hazet
- Meec Tools
- Guede
- Bosch
- Fieldmann
- Weidmüller
- Cleco
- Silverline
- Power Craft
- Tacklife
- Craftsman
- RYOBI
- Omega
- Brüder Mannesmann
Nyeste Skruemaskine Manualer
8 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025