Makita DFT024FMZ Manual

Makita Skruemaskine DFT024FMZ

Læs gratis den danske manual til Makita DFT024FMZ (17 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Makita DFT024FMZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/17

INSTRUCTION MANUAL

Cordless Screwdriver

DFT024F

DFT025F

DFT060F

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DFT024F DFT025F DFT060F

Fastening torque Hard joint 0.5 - 2 N•m 1.5 - 6.5 N•m

Soft joint 0.5 - 2 N•m 1.5 - 6.5 N•m

No load speed (RPM) 260 - 1,600 min

-1 100 - 1,300 min-1

Dimensions (L x W x H) with BL1815N battery 161 mm x 75 mm x 242 mm

with BL1860B battery 161 mm x 75 mm x 258 mm

Rated voltage D.C. 18 V

Net weight 1.2 - 1.5 kg

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may dier from country to country.

• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for screw driving in wood, metal

and plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-2:

Model DFT024F

Sound pressure level (LpA) : 70 dB(A) or less

Uncertainty (K) : 3 dB(A)

Model DFT025F

Sound pressure level (LpA) : 70 dB(A) or less

Uncertainty (K) : 3 dB(A)

Model DFT060F

Sound pressure level (L

pA) : 70 dB(A) or less

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may

also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-2:

Model DFT024F

Work mode: screwdriving without impact

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Model DFT025F

Work mode: screwdriving without impact

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Produkt Specifikationer

Mærke:	Makita
Kategori:	Skruemaskine
Model:	DFT024FMZ

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DFT024FMZ stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skruemaskine Makita Manualer

Makita DTW1005 Manual

26 August 2025

26 August 2025

26 August 2025

11 August 2025

19 Juli 2025

19 Juli 2025

Makita HP333D-SAE Manual

15 Juli 2025

Makita BFL301R Manual

9 Juli 2025

Makita DTW302 Manual

9 Juli 2025

Makita DFT083F Manual

9 Juli 2025

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Yato YT-09512 Manual

29 September 2025

Metabo SBE 650/13 Manual

29 September 2025

Hazet 9213-1000LB Manual

28 September 2025

NEO Tools 14-502 Manual

28 September 2025

Hazet 9012ECO Manual

28 September 2025

Hazet 9212-1000LB Manual

28 September 2025

28 September 2025

27 September 2025

27 September 2025

27 September 2025