Makita DFT045FMZ Manual

Makita Skruemaskine DFT045FMZ

Læs gratis den danske manual til Makita DFT045FMZ (12 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Makita DFT045FMZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Cordless Screwdriver

DFT023F

DFT045F

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DFT023F DFT045F

Fastening torque Hard joint 0.5 - 2 N•m 1 - 4 N•m

Soft joint 0.5 - 2 N•m 1 - 4 N•m

No load speed 400 - 1,300 min

-1 150 - 900 min-1

Dimensions (L x W x H) with BL1415 battery 159 mm x 72 mm x 232 mm

with BL1430 battery 159 mm x 72 mm x 249 mm

Rated voltage D.C. 14.4 V

Standard battery cartridge BL1415, BL1415N, BL1415NA, BL1430, BL1430A, BL1430B,

BL1440, BL1450, BL1460A, BL1460B

Charger DC18RC, DC18RD, DC18SD, DC18SE, DC18SF

Net weight 1.1 - 1.3 kg

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications and battery cartridge may differ from country to country.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for screw driving in wood, metal

and plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841:

Model DFT023F

Sound pressure level (L

pA) : 70 dB(A) or less

Uncertainty (K) : 3 dB(A)

Model DFT045F

Sound pressure level (L

pA) : 70 dB(A) or less

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841:

Model DFT023F

Work mode: screwdriving without impact

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Model DFT045F

Work mode: screwdriving without impact

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Skruemaskine
Model:	DFT045FMZ

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DFT045FMZ stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skruemaskine Makita Manualer

Makita DTW1005 Manual

26 August 2025

26 August 2025

26 August 2025

11 August 2025

19 Juli 2025

19 Juli 2025

Makita HP333D-SAE Manual

15 Juli 2025

Makita BFL301R Manual

9 Juli 2025

Makita DTW302 Manual

9 Juli 2025

Makita DFT083F Manual

9 Juli 2025

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Yato YT-09512 Manual

29 September 2025

Metabo SBE 650/13 Manual

29 September 2025

Hazet 9213-1000LB Manual

28 September 2025

NEO Tools 14-502 Manual

28 September 2025

Hazet 9012ECO Manual

28 September 2025

Hazet 9212-1000LB Manual

28 September 2025

28 September 2025

27 September 2025

27 September 2025

27 September 2025