Makita DHP458RF3J Manual

Makita Boremaskine DHP458RF3J

Læs gratis den danske manual til Makita DHP458RF3J (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Makita DHP458RF3J, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Hammer Driver Drill

DHP448

DHP458

012710

ENGLISH (Original instructions)

SPECIFICATIONS

Model DHP448 DHP458

Drilling into concrete 14 mm 16 mm

Drilling into steel 13 mm 13 mm

Drilling into wood 65 mm 76 mm

Fastening wood screw 8 mm x 75 mm 10 mm x 90 mm

Capacities

Fastening machine screw 6 mm

High (2) 0 - 1,800 min

-1 0 - 2,000 min-1

No load speed Low (1) 0 - 350 min-1 0 - 400 min-1

High (2) 0 - 27,000 min

-1 0 - 30,000 min

-1

Blows per minute Low (1) 0 - 5,200 min-1 0 - 6,000 min-1

Overall length 225 mm

Net weight 2.2 kg 2.3 kg

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE079-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone. It is also suitable for screw driving and drilling

without impact in wood, metal, ceramic and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model DHP448

Sound pressure level (L

pA) : 82 dB (A)

Sound power level (L

WA) : 93 dB (A)

Uncertainty (K) : 3 dB (A)

Model DHP458

Sound pressure level (L

pA) : 84 dB (A)

Sound power level (L

WA) : 95 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model DHP448

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s2

Model DHP458

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	DHP458RF3J
Bredde:	225 mm
Dybde:	79 mm
Højde:	259 mm
Vægt:	2400 g
Produktfarve:	Black,Blue,Silver
Opladningstid:	22 min.
Batterispænding:	18 V
Batterikapacitet:	3 At
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Batterioplader inkluderet:	Ja
Omvendt:	Ja
Produktdesign:	Pistolgreb boremaskine
Borepatron, kæbe breddee (maks.):	13 mm
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	75 mm
Skrue diameter (maks.):	75 mm
Bore diameter, beton (maks.):	16 mm
Boring:	Ja
Skruearbejde:	Ja
Slagboring:	Ja
Batteri medfølger:	Ja
Maksimal torsion (bløde applikationer):	58 Nm
Borepatron, kæbe bredde (min.):	1.5 mm
Tomgangshastighed (1. gear):	400 rpm
Tomgangshastighed (2. gear):	2000 rpm
Maksimal torsion (hårde applikationer):	91 Nm