Makita DHP481RMJ Manual

Makita Boremaskine DHP481RMJ

Læs gratis den danske manual til Makita DHP481RMJ (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Makita DHP481RMJ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Hammer Driver Drill

DHP481

014694

ENGLISH (Original instructions)

SPECIFICATIONS

Model DHP481

Drilling into concrete 16 mm

Drilling into steel 13 mm

Drilling into wood 76 mm

Fastening wood screw 10 mm x 90 mm

Capacities

Fastening machine screw 6 mm

High (2) 0 - 2,100

No load speed (min-1) Low (1) 0 - 550

High (2) 0 - 31,500

Blows per minute Low (1) 0 - 8,250

Overall length 205 mm

Net weight 2.7 kg

Rated voltage D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws,

electric equipment and batteries and

battery pack(s) that have reached the

end of their life must be collected

separately and returned to an

environmentally compatible recycling

facility.

ENE079-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone. It is also suitable for screw driving and

drilling without impact in wood, metal, ceramic and

plastic.

GEA006-2

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	DHP481RMJ
Bredde:	79 mm
Dybde:	205 mm
Højde:	266 mm
Vægt:	2700 g
Produktfarve:	Black,Turquoise
Batterispænding:	18 V
Batterikapacitet:	4 At
Indbygget lys:	Ja
Borepatron type:	Nøglefri
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Bæretaske:	Ja
Numre af batterier medfølger:	2 stk
Vibrationsudledning:	6.5 m/s²
Batterioplader inkluderet:	Ja
Omvendt:	Ja
Produktdesign:	Pistolgreb boremaskine
Borepatron, kæbe breddee (maks.):	13 mm
Torsion indstillinger:	21
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	76 mm
Antal gear:	2
Bore diameter, beton (maks.):	16 mm
Boring:	Ja
Skruearbejde:	Ja
Slagboring:	Ja
Batteri medfølger:	Ja
Bitskruetrækker:	Ja
Maksimal torsion (bløde applikationer):	60 Nm
Borepatron, kæbe bredde (min.):	1.5 mm
Tomgangshastighed (1. gear):	550 rpm
Tomgangshastighed (2. gear):	2100 rpm
Maksimal torsion (hårde applikationer):	115 Nm
Hjælpehåndtag:	Ja