Makita DP4011 Manual

Makita Bore-skruemaskiner DP4011

Læs gratis den danske manual til Makita DP4011 (8 sider) i kategorien Bore-skruemaskiner. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Makita DP4011, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

2-speed drill

DP4010

DP4011

008321

ENGLISH (Original instructions)

SPECIFICATIONS

Model DP4010/DP4011

Speed High Low

Steel 8 mm 13 mm

Capacities Wood 25 mm 40 mm

No load speed (min

-1) 0 - 2,900 0 - 1,200

Overall length 347 mm

Net weight 2.3 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and electronic

equipment and its implementation in

accordance with national law, electric

equipment that have reached the end of their

life must be collected separately and

returned to an environmentally compatible

recycling facility.

ENE032-1

Intended use

The tool is intended for drilling in wood, metal and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG104-1

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 80 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG202-3

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

2-speed drill

Model No./ Type: DP4010,DP4011

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

Produkt Specifikationer

Mærke:	Makita
Kategori:	Bore-skruemaskiner
Model:	DP4011
Type:	Boremaskine
Vægt:	2300 g
Borepatron type:	Nøglefri
Indgangseffekt:	720 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	2900 rpm
Omvendt:	Ja
Bore diameter, stål (maks.):	13 mm
Antal gear:	2
Tomgangshastighed (1. gear):	1200 rpm
Tomgangshastighed (2. gear):	2900 rpm