Makita EK6100 Manual

Makita savemaskine EK6100

Læs gratis den danske manual til Makita EK6100 (28 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Makita EK6100, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
Important:
Read this instruction manual carefully before putting the Power Cut into operation and strictly observe the
safety regulations!
Keep this instruction manual!
Instruction Manual
Original Instruction Manual
EK6100
EK6101
2
Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA Power Cut cutoff saw!
Like our chain saws, the MAKITA Power Cuts feature spe-
cially designed high-performance engines with outstanding
power-to-weight ratios, for heavy-duty yet lightweight tools.
Other advantages of the MAKITA Power Cuts:
• Sturdy construction and high reliability.
• Maintenance-free electronic ignition, hermetically sealed to
protect against dust and moisture.
• Vibration damping with the MAKITA 2-mass system (D2M) for
tireless working even when guiding the Power Cut by hand.
• Multilevel air Þ lter system with turbo-cyclone Þ lter for depen-
dable function even under very dusty conditions.
• The Featherlight-Start system lets you start the cutter effort-
lessly with a spring-loaded starting assist.
• Extensive range of resin-bonded and diamond grit cutting
discs.
The following industrial property rights apply:
DE 202010000143 U1, DE 202011050393 U1, DE 202011050396
U1, DE 202011050394 U1, DE 202010004275 U1, DE
202009010557 U1, DE 202009006860 U1, DE 202008003781
U1.
We want you to be satisÞ ed with your MAKITA product.
In order to guarantee the optimal function and performance of
your Power Cut and to ensure your personal safety we would
request you to perform the following:
Read this instruction manual carefully before putting the
Power Cut into operation for the Þ rst time, and strictly
observe the safety regulations! Failure to observe these
precautions can lead to severe injury or death!
EU Conformity Declaration
The undersigned, Tom as authorized by oyasu Kato, MAKITA
Corporation, declare that the MAKITA machines,
Type: 315
Power Cut EK6100, EK6101
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho,
Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and
health requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive
2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the re-
quirements of the above EU Directive were: EN 19432, CISPR
12, EN ISO 14982, DIN EN 61000-4.
The conformity assessment procedure 2000/14/EG was per-
formed per Annex V. The measured noise level (Lwa) is 114
dB(A). The guaranteed noise level (Ld) is 115 dB(A).
The technical documentation is on Þ le at MAKITA International
Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks,
MK15 8JD, England.
Anjo, 20.8.2012 for MAKITA Corporation
Tomoyasu Kato
Managing Director
Table of contents Page
Packing ................................................................................ 2
Delivery inventory .............................................................. 3
Symbols ...............................................................................3
SAFETY PRECAUTIONS
Intended use ................................................................... 4
General precautions ....................................................... 4
Protective equipment ...................................................4-5
Fuels / Refuelling ............................................................ 5
Putting into operation ...................................................... 5
Cutting discs ................................................................... 6
Kickback and lock-in .......................................................7
Working behavior / Method of working ............................ 7
Always observe the following when using
synthetic resin cutting discs ............................................. 8
Cutting metal ................................................................... 8
Cutting masonry and concrete .....................................8-9
Transport and storage .....................................................9
Maintenance ................................................................. 10
First aid ......................................................................... 10
Disposal and environmental protection ......................... 10
Technical data ................................................................... 11
Denomination of components ......................................... 12
PUTTING INTO OPERATION
Mounting the cutting disc ............................................... 13
Fuels / Refuelling ..................................................... 14-15
Starting the engine ........................................................ 16
Cold-starting .................................................................16
Warm-starting ............................................................... 16
Stop engine ................................................................... 16
Adjusting the carburetor .................................................. 17
MAINTENANCE
Changing the V-belt ...................................................... 18
Cleaning the protection hood ........................................ 19
Cleaning / changing the air Þ lter ...................................19
Replacing the spark plug .............................................. 20
Checking the ignition spark ............................................ 20
Replacing the suction head ..........................................20
Replacing the starter cable ........................................... 21
Replacing the return spring ...........................................22
Replacing the start spring ............................................. 22
Instructions for periodic maintenance ........................... 23
Service, spare parts and guarantee ........................... 23-24
Troubleshooting ...............................................................25
SPECIAL ACCESSORIES
Diamond cutting discs, water tank ................................. 25
Extract from spare parts list ....................................... 26-27
Packing
Your MAKITA Power Cut is packed in a cardboard box to pr e-
vent shipping damage.
Cardboard is a basic raw material and is consequently reuseable
or suitable for recycling (waste paper recycling).

Produkt Specifikationer

Mærke: Makita
Kategori: savemaskine
Model: EK6100

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita EK6100 stil et spørgsmål nedenfor, og andre brugere vil svare dig


savemaskine Makita Manualer

Makita

Makita 5603 Manual

14 Oktober 2024
Makita

Makita EA3502S Manual

2 Oktober 2024
Makita

Makita DJV140 Manual

2 Oktober 2024
Makita

Makita DJV182RTJ Manual

30 September 2024
Makita

Makita HS301DWAE Manual

30 September 2024
Makita

Makita DSS500RFJ Manual

27 September 2024
Makita

Makita DSS610ZJ Manual

14 September 2024
Makita

Makita 2414EN Manual

7 September 2024
Makita

Makita BSS500RFJ Manual

24 August 2024
Makita

Makita DLM463Z Manual

21 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell

Einhell GE-CS 18 Li Manual

15 Oktober 2024
MSW

MSW -TAS287 Manual

15 Oktober 2024
MSW

MSW T-SAW300 Manual

15 Oktober 2024
FERM

FERM FKS-165 Manual

13 Oktober 2024
Einhell

Einhell TC-AP 650 E Manual

12 Oktober 2024
Einhell

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024
Einhell

Einhell BT-SM 2534 Manual

11 Oktober 2024
Hitachi

Hitachi C 7MFA(LA) Manual

9 Oktober 2024
Ozito

Ozito ECS-406A Manual

6 Oktober 2024
Ferrex

Ferrex DX254TS Manual

5 Oktober 2024