Makita EK8100 Manual

Makita Sav EK8100

Læs gratis den danske manual til Makita EK8100 (32 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Makita EK8100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

Important:

Read this instruction manual carefully before putting the Power Cut into operation and strictly observe the

safety regulations!

Keep this instruction manual!

Instruction Manual

Original Instruction Manual

EK7300

EK7301

EK8100

Table of contents Page

Packing ................................................................................ 2

Delivery inventory .............................................................. 3

Symbols ...............................................................................3

SAFETY PRECAUTIONS

Intended use ................................................................... 4

General precautions ....................................................... 4

Protective equipment ...................................................4-5

Fuels / Refuelling ............................................................5

Putting into operation ...................................................... 5

Cutting discs ................................................................... 6

Kickback and lock-in ....................................................... 7

Working behavior / Method of working ............................ 7

Always observe the following when using

synthetic resin cutting discs ............................................. 8

Cutting metal ...................................................................8

Cutting masonry and concrete .....................................8-9

Transport and storage ..................................................... 9

Maintenance ................................................................. 10

First aid ......................................................................... 10

Disposal and environmental protection .........................10

Technical data ................................................................... 11

Denomination of components ......................................... 12

PUTTING INTO OPERATION

Mounting the cutting disc ............................................... 13

Tightening the V-belt / Checking V-belt tension ............ 14

Fuels / Refuelling .....................................................14-15

Starting the engine ........................................................16

Cold-starting .................................................................17

Warm-starting ............................................................... 17

Stop engine ...................................................................17

Adjusting the carburetor .................................................. 18

MAINTENANCE

Changing the V-belt ...................................................... 19

Cleaning the protection hood ........................................ 20

Cleaning / changing the air Þ lter ..............................20-21

Replacing the spark plug .............................................. 22

Replacing the suction head ..........................................22

Replacing the starter cable ........................................... 23

Replacing the return spring ...........................................24

Replacing / cleaning the spark arrester screen .............26

Instructions for periodic maintenance ........................... 28

Cutting attachment in central / side position ................. 25

Repositioning the cutting attachment ....................... 25-26

SPECIAL ACCESSORIES

Diamond cutting discs, trolley, water tank

and pressure water system ............................................27

Service, spare parts and guarantee ................................ 28

Troubleshooting ...............................................................29

Extract from spare parts list .......................................30-31

Accessories ..................................................................31

Packing

Your MAKITA Power Cut is packed in a cardboard box to pr e-

vent shipping damage.

Cardboard is a basic raw material and is consequently reuseable

or suitable for recycling (waste paper recycling).

Thank you for purchasing a MAKITA product!

Congratulations on choosing a MAKITA Power Cut cutoff saw!

We are conÞ dent that you will be satisÞ ed with this modern

piece of equipment. Like our chain saws, the MAKITA Power

Cuts feature specially designed high-performance engines

with outstanding power-to-weight ratios, for heavy-duty yet

lightweight tools.

Other advantages of the MAKITA Power Cuts:

• Sturdy construction and high reliability.

• Maintenance-free electronic ignition, hermetically sealed to

protect against dust and moisture.

• Vibration damping with the MAKITA 2-mass system (D2M) for

tireless working even when guiding the Power Cut by hand.

• Five-stage air-Þ lter system for reliable working even under

very dusty conditions.

• Two options for mounting the cutter attachment: Either cen-

trally, for good balance when guiding the unit manually, or on

the side, for ß ush cuts along walls or curbsides or horizontally

directly above the ground.

• Extensive range of resin-bonded and diamond grit cutting

discs, trolley with dust catcher, and systems for supplying

water to the disc.

The following industrial property rights apply: US 08510690,

SE 95027298, SE 95027306, IT 95000653, IT 95000654, GBM

9412558, GBM 9412559.

We want you to be satisÞ ed with your MAKITA product.

In order to guarantee the optimal function and performance of

your Power Cut and to ensure your personal safety we would

request you to perform the following:

Read this instruction manual carefully before putting the

Power Cut into operation for the Þ rst time, and strictly

observe the safety regulations! Failure to observe these

precautions can lead to severe injury or death!

EU Conformity Declaration

The undersigned, Tom as authorized by oyasu Kato, MAKITA

Corporation, declare that the MAKITA machines,

Type: 395, 328

Power Cut EK7300, EK7301 ( EK8100395), (328)

manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho,

Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and

health requirements of the applicable EU Directives:

EU Machinery Directive 2006/42/EG, EU EMC Directive

2004/108/ EG, Outdoor Noise Directive 2000/14/EG.

The most important standards applied to properly meet the re-

quirements of the above EU Directive were: EN 19432, CISPR

12, EN ISO 14982, DIN EN 61000-4. The conformity assess-

ment procedure 2000/14/EG was performed per Annex V. The

measured noise level (Lwa) is 114 dB(A). The guaranteed noise

level (Ld) is 115 dB(A).

The technical documentation is on Þ le at MAKITA International

Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks,

MK15 8JD, England.

Anjo, 1.10.2012 for MAKITA Corporation

Tomoyasu Kato

Managing Director

Produkt Specifikationer

Mærke:	Makita
Kategori:	Sav
Model:	EK8100

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita EK8100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Makita Manualer

19 Juli 2025

15 Juli 2025

9 Juli 2025

9 Juli 2025

9 Juli 2025

8 Juli 2025

8 Juli 2025

8 Juli 2025

8 Juli 2025

8 Juli 2025

Sav Manualer

Nyeste Sav Manualer

RYOBI CS-1835 Manual

31 Juli 2025

Guede KS 450-55 Manual

31 Juli 2025

RYOBI CS-4016 Manual

31 Juli 2025

RYOBI RRS1801M Manual

31 Juli 2025

Skil 3540 CA Manual

31 Juli 2025

RYOBI One+ RPLS18X Manual

31 Juli 2025

RYOBI One+ RMS18254X Manual

31 Juli 2025

RYOBI RTBS18X Manual

31 Juli 2025

RYOBI CS-2240 Manual

31 Juli 2025

RYOBI RTS18C Manual

31 Juli 2025