Makita GA5021 Manual

Makita Kværn GA5021

Læs gratis den danske manual til Makita GA5021 (16 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 27 anmeldelser. Har du et spørgsmål om Makita GA5021, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Angle Grinder

GA5020

GA5020C

GA5021

GA5021C

GA6020

GA6020C

GA6021

GA6021C

008074

ENGLISH (Original instructions)

SPECIFICATIONS

Model GA5020 GA5021 GA5020C/

GA5021C GA6020 GA6021 GA6020C/

GA6021C

Depressed center wheel diameter 125 mm 125 mm 125 mm 150 mm 150 mm 150 mm

Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm

Spindle thread M14 M14 M14 M14 M14 M14

No load speed (no) / Rated speed (n)

12,000 min

-1

12,000 min

-1

10,000 min

-1

10,000 min

-1

10,000 min

-1

9,000 min

-1

Overall length 356 mm 384 mm 390 mm 356 mm 384 mm 390 mm

Net weight 2.7 kg 2.7 kg 2.9 kg 3.0 kg 2.8 kg 3.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2012/19/EU on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Model GA5020,GA6020 and GA6021

Sound pressure level (L

pA ) : 89 dB(A)

Sound power level (L

WA) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Model GA5020C,GA5021,GA5021C and

GA6021C

Sound pressure level (L

pA ) : 90 dB(A)

Sound power level (L

WA) : 101 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model GA6021

Work mode : surface grinding

Vibration emission (ah,AG) : 6.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : disc sanding

Vibration emission (ah,DS) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model GA5021C

Work mode : surface grinding

Vibration emission (ah,AG) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	GA5021
Vægt:	2500 g
Produktfarve:	Blå
Indgangseffekt:	1050 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	11000 rpm
Slibeskive, diameter:	125 mm