Makita GA9020 Manual

Makita Vinkelslibere GA9020

Læs gratis den danske manual til Makita GA9020 (16 sider) i kategorien Vinkelslibere. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Makita GA9020, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Angle Grinder

GA7020

GA7020S

GA7021

GA9020

GA9020S

010853

ENGLISH (Original instructions)

SPECIFICATIONS

Model GA7020 GA7020S GA7021 GA9020 GA9020S

Depressed center wheel diameter 180 mm 180 mm 230 mm

Max. wheel thickness 6.5 mm 6.5 mm 6.5 mm 6.5 mm 6.5 mm

Spindle thread M14 or 5/8"

(country specific)

M14 or 5/8"

(country specific)

M14 or 5/8"

(country specific)

Rated speed (n) / No load speed (n

0) 8,500 min-1 6,600 min-1 6,600 min-1

Overall length 473 mm 473 mm 473 mm

Net weight 5.5 kg 5.7 kg 5.5 kg 5.8 kg 5.9 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2012/19/EU on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under unfavorable

mains conditions can have adverse effects to the operation

of other equipment. With a mains impedance equal or less

than 0.27 Ohms it can be presumed that there will be no

negative effects. The mains socket used for this device must

be protected with a fuse or protective circuit breaker having

slow tripping characteristics.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 89 dB (A)

Sound power level (L

WA) : 100 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model GA7020,GA7020S

Work mode : surface grinding with normal side

grip

Vibration emission (ah,AG) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : surface grinding with anti vibration

side grip

Vibration emission (ah,AG) : 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Produkt Specifikationer

Mærke:	Makita
Kategori:	Vinkelslibere
Model:	GA9020
Bredde:	249 mm
Højde:	473 mm
Vægt:	5800 g
Produktfarve:	Black,Blue,Silver
Indgangseffekt:	2200 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	6600 rpm
Længde:	140 mm
Spindelgevind:	M14
Slibeskive, diameter:	230 mm