Makita GA9040S Manual

Makita Vinkelslibere GA9040S

Læs gratis den danske manual til Makita GA9040S (16 sider) i kategorien Vinkelslibere. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Makita GA9040S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Angle Grinder

GA7030,GA7030S

GA7040S

GA9030, GA9030S

GA9040S

007051

ENGLISH (Original instructions)

SPECIFICATIONS

Model

GA7030/GA7030S

GA7040S

GA9030/GA9030S

GA9040S

Depressed center wheel diameter 180 mm 230 mm

Spindle thread M14 M14

Rated speed (n)/ No load speed (n

0) 8,500 min-1

6,600 min-1

Overall length 511 mm 511 mm

Net weight 6.0 kg 6.4 kg 6.3 kg 6.7 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under

unfavorable mains conditions can have adverse effects

to the operation of other equipment. With a mains

impedance equal or less than 0.23 Ohms it can be

presumed that there will be no negative effects. The

mains socket used for this device must be protected with

a fuse or protective circuit breaker having slow tripping

characteristics.

For Model GA7030,GA7030S

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 89 dB(A)

Sound power level (L

WA) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG208-5

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : surface grinding

Vibration emission (ah,AG) : 6.5 m/s2

Uncertainty (K) : 1.5 m/s2

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

The declared vibration emission value may also be used

in a preliminary assessment of exposure.

The declared vibration emission value is used for main

applications of the power tool. However if the power tool

is used for other applications, the vibration emission

value may be different.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

Produkt Specifikationer

Mærke:	Makita
Kategori:	Vinkelslibere
Model:	GA9040S

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita GA9040S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vinkelslibere Makita Manualer

Makita M9502R Manual

14 Oktober 2024

Makita 9562CR Manual

8 Oktober 2024

Makita GA7061R Manual

14 Juli 2024

Makita GA7010C Manual

11 Juli 2024

Makita GA7061 Manual

10 Juli 2024

Makita 9565CVR Manual

6 Juli 2024

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

Vinkelslibere Manualer

Nyeste Vinkelslibere Manualer

Hitachi G 18SE2 Manual

14 Januar 2025

Black And Decker BPGL2207 Manual

12 Oktober 2024

AEG WS 125 S Manual

13 Juli 2024

Einhell TE-AG 115/600 Manual

13 Juli 2024

Hitachi G 12SR3 Manual

13 Juli 2024

AEG WS 115 S Manual

13 Juli 2024

Parkside PWSAP 20-Li A1 Manual

10 Juli 2024

Hikoki G 10SF3 Manual

8 Juli 2024

Black And Decker KG2205 Manual

5 Oktober 2022

Bosch GWS 7-115 E Professional Manual

5 Oktober 2022