Makita HM1203C Manual

Makita Nedbrydningshammere HM1203C

Læs gratis den danske manual til Makita HM1203C (12 sider) i kategorien Nedbrydningshammere. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Makita HM1203C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Demolition Hammer

HM1213C

HM1203C

009939

ENGLISH (Original instructions)

SPECIFICATIONS

Model HM1213C HM1203C

Blows per minute 950 - 1,900 min

-1

Overall length 576 mm

Net weight 10.8 kg 9.7 kg

Safety class II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE045-1

Intended use

The tool is intended for chiselling work in concrete, brick,

stone and asphalt as well as for driving and compacting

with appropriate accessories.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model HM1213C

Sound pressure level (L

pA) : 75 dB(A)

Sound power level (L

WA) : 95 dB(A)

Uncertainty (K) : 2.53 dB(A)

Model HM1203C

Sound pressure level (L

pA) : 81 dB(A)

Sound power level (L

WA) : 95 dB(A)

Uncertainty (K) : 2.1 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model HM1213C

Work mode : chiseling function with side handle

Vibration emission (ah,CHeq) : 7.0 m/s2

Uncertainty (K) : 1.5 m/s2

Model HM1203C

Work mode : chiseling function with side handle

Vibration emission (ah,CHeq) : 15.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Nedbrydningshammere
Model:	HM1203C
Bredde:	576 mm
Dybde:	128 mm
Højde:	265 mm
Vægt:	9700 g
Produktfarve:	Black, Blue
Indgangseffekt:	1510 W
Energi ved slagkraft:	19.1 J
Slagkraft:	1950 bpm or slag i minuttet
Vibrationsniveau (mejsling):	15.5 m/s²
Værktøjsholder:	12 mm