Makita HP002GD203 Manual

Makita Boremaskine HP002GD203

Læs gratis den danske manual til Makita HP002GD203 (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Makita HP002GD203, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Cordless Hammer Driver Drill

HP002G

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: HP002G

Drilling capacities 13 mmMasonry

Steel 13 mm

Wood Auger bit: 38 mm

Self-feed bit: 38 mm

Hole saw: 51 mm

Fastening capacities Wood screw 10 mm x 90 mm

Machine screw M6

No load speed (RPM) High (2) 0 - 2,200 min-1

Low (1) 0 - 600 min-1

Blows per minute High (2) 0 - 33,000 min-1

Low (1) 0 - 9,000 min-1

Overall length 174 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 2.0 - 2.9 kg

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may dier from country to country.

• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL4020* / BL4025* / BL4040* / BL4050F

* : Recommended battery

Charger DC40RA / DC40RB / DC40RC

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for impact drilling in brick, brickwork

and masonry. It is also suitable for screw driving and

drilling without impact in wood, metal, ceramic and

plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-1:

Sound pressure level (L

pA) : 87 dB(A)

Sound power level (L

WA) : 98 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may

also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	HP002GD203

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita HP002GD203 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Boremaskine Makita Manualer

8 September 2025

27 August 2025

26 August 2025

11 August 2025

15 Juli 2025

Makita HR3011FC Manual

9 Juli 2025

Makita DP4021 Manual

8 Juli 2025

Makita HR008G Manual

8 Juli 2025

Makita HK1820L Manual

8 Juli 2025

Makita DP4020 Manual

8 Juli 2025

Boremaskine Manualer

Nyeste Boremaskine Manualer

Bosch GBH 7-46 DE Professional Manual

3 Oktober 2025

Draper Expert 95092 Manual

1 Oktober 2025

Draper Expert 14258 Manual

1 Oktober 2025

Draper Storm Force 38255 Manual

1 Oktober 2025

Stanley FatMax SFMEH230K Manual

1 Oktober 2025

Draper 54488 Manual

1 Oktober 2025

Hazet 9530-11 Manual

30 September 2025

Bavaria BCD 18 2B Manual

29 September 2025

Bavaria BCD 18 Manual

29 September 2025

Bavaria BCD 14.4 2B Manual

29 September 2025