Makita HP1640K Manual

Makita Boremaskine HP1640K

Læs gratis den danske manual til Makita HP1640K (8 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Makita HP1640K, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Hammer Drill

HP1640

HP1640F

HP1641

HP1641F

009237

ENGLISH (Original instructions)

SPECIFICATIONS

Model HP1640/HP1640F/HP1641/HP1641F

Concrete 16 mm

Steel 13 mm

Capacities

Wood 30 mm

No load speed (min

-1 ) 0 - 2,800

Blows per minute 0 - 44,800

Overall length 303 mm

Net weight 2.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE039-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For Model HP1640,HP1641,HP1641F

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 92 dB (A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG203-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 19 m/s2

Uncertainty (K) : 2.0 m/s2

ENG301-1

Work mode : drilling into metal

Vibration emission (ah,D) : 2.5 m/s

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	HP1640K
Type:	Hammerboremaskine
Vekselstrømsindgangsspænding:	110-240 V
Bredde:	303 mm
Dybde:	72 mm
Højde:	222 mm
Vægt:	2000 g
Produktfarve:	Black, Turquoise
Borepatron type:	Nøgle
Indgangseffekt:	680 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	2800 rpm
Bæretaske:	Ja
Lydeffektniveau:	103 dB
Lydtryksniveau:	92 dB
Justerbar hastighed:	Ja
Usikkerhed i lydniveauet:	3 dB
Omvendt:	Ja
Produktdesign:	Pistolgreb boremaskine
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	30 mm
Skrue diameter (maks.):	13 mm
Effekt hastighed (høj hastighed):	4480 bpm or slag i minuttet
Bore diameter, beton (maks.):	16 mm
Slagboring:	Ja
Hjælpehåndtag:	Ja
Kontinuerlig kontakt:	Ja