Makita HP2050 Manual

Makita Boremaskine HP2050

Læs gratis den danske manual til Makita HP2050 (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Makita HP2050, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

2-Speed Hammer Drill

HP2050

HP2050F

HP2051

HP2051F

002989

ENGLISH (Original instructions)

SPECIFICATIONS

Model HP2050/HP2050F HP2051/HP2051F

Speed High Low High Low

Concrete 20 mm ----- 20 mm -----

Steel 8 mm 13 mm 8 mm 13 mm

Capacities

Wood 25 mm 40 mm 25 mm 40 mm

No load speed (min-1

) 0 - 2,900 0 - 1,200 0 - 2,900 0 - 1,200

Blows per minute 0 - 58,000 0 - 24,000 0 - 58,000 0 - 24,000

Overall length 362 mm 360 mm

Net weight 2.5 kg 2.5 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE039-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 97 dB (A)

Sound power level (L

WA) : 108 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 13 m/s2

Uncertainty (K) : 3 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	HP2050
Bredde:	70 mm
Dybde:	360 mm
Højde:	220 mm
Vægt:	2540 g
Borepatron type:	Nøgle
Indgangseffekt:	720 W
Strømkilde:	Vekselstrøm
Kabellængde:	2.5 m
Justerbar hastighed:	Ja
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	40 mm
Antal gear:	2
Skrue diameter (maks.):	13 mm
Bore diameter, beton (maks.):	20 mm
Slagboring:	Ja
Tomgangshastighed (1. gear):	1200 rpm
Tomgangshastighed (2. gear):	2900 rpm