Makita HP2071F Manual

Makita Boremaskine HP2071F

Læs gratis den danske manual til Makita HP2071F (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Makita HP2071F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

2-Speed Hammer Drill

HP2070

HP2070F

HP2071

HP2071F

004284

ENGLISH (Original instructions)

SPECIFICATIONS

Model HP2070/HP2070F HP2071/HP2071F

Speed High Low High Low

Concrete 20 mm ----- 20 mm -----

Steel 8 mm 16 mm 8 mm 16 mm

Capacities

Wood 25 mm 40 mm 25 mm 40 mm

No load speed (min

-1) 0 - 2,900 0 - 1,200 0 - 2,900 0 - 1,200

Blows per minute 0 - 58,000 0 - 24,000 0 - 58,000 0 - 24,000

Overall length 364 mm 362 mm

Net weight 2.6 kg 2.6 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE042-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone.

It is also suitable for drilling without impact in wood, metal,

ceramic and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 99 dB(A)

Sound power level (L

WA) : 110 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 16.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	HP2071F
Type:	Boremaskine
Vægt:	2400 g
Indgangseffekt:	1010 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	2900 rpm
Bore diameter, stål (maks.):	16 mm
Bore diameter, træ (maks.):	40 mm
Antal gear:	2
Bore-diameter, sten (maks.):	20 mm
Tomgangshastighed (1. gear):	2900 rpm
Tomgangshastighed (2. gear):	1200 rpm