Makita HP330DWE Manual

Makita Boremaskine HP330DWE

Læs gratis den danske manual til Makita HP330DWE (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Makita HP330DWE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Hammer Driver Drill

HP330D

012913

ENGLISH (Original instructions)

SPECIFICATIONS

Model HP330D

Concrete 8 mm

Steel 10 mm

Wood 21 mm

Wood screw 5.1 mm x 63 mm

Capacities

Machine screw M6

High (2) 0 - 1,500

No load speed (min-1) Low (1) 0 - 400

High (2) 0 - 22,500

Blows per minute (min-1) Low (1) 0 - 6,000

Overall length 201 mm

Net weight 1.1 kg

Rated voltage D.C. 10.8 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE079-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone. It is also suitable for screw driving and drilling

without impact in wood, metal, ceramic and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (LpA) : 82 dB (A)

Sound power level (LWA) : 93 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode: impact drilling into concrete

Vibration emission (ah,ID) : 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	HP330DWE
Produktfarve:	Black, Cyan
Opladningstid:	50 min.
Batterispænding:	10.8 V
Batterikapacitet:	1.3 At
Indbygget lys:	Ja
Borepatron type:	Nøglefri
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Soft greb:	Ja
Batteritype:	BL1013
Numre af batterier medfølger:	2 stk
Batterioplader inkluderet:	Ja
Omvendt:	Ja
Produktdesign:	Pistolgreb boremaskine
Borepatron, kæbe breddee (maks.):	10 mm
Torsion indstillinger:	18
Bore diameter, stål (maks.):	10 mm
Bore diameter, træ (maks.):	21 mm
Antal gear:	2
Boring:	Ja
Slagboring:	Ja
Batteri medfølger:	Ja
Maksimal torsion (bløde applikationer):	14 Nm
Tomgangshastighed (1. gear):	350 rpm
Tomgangshastighed (2. gear):	1300 rpm
Maksimal torsion (hårde applikationer):	30 Nm