Makita HP333DZ Manual

Makita Boremaskine HP333DZ

Læs gratis den danske manual til Makita HP333DZ (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Makita HP333DZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Cordless Hammer Driver Drill

HP333D

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: HP333D

Drilling capacities 8 mmMasonry

Steel 10 mm

Wood 21 mm

Fastening capacities Wood screw 5.1 mm x 63 mm

Machine screw M6

No load speed High (2) 0 - 1,700 min-1

Low (1) 0 - 450 min-1

Blows per minute High (2) 0 - 25,500 min-1

Low (1) 0 - 6,750 min-1

Overall length 193 mm

Rated voltage D.C. 10.8 V - 12 V max

Net weight 1.1 - 1.3 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B

Charger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

andchargersmaycauseinjuryand/orre.

Symbols

The followings show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for impact drilling in brick, brickwork

and masonry. It is also suitable for screw driving and

drilling without impact in wood, metal, ceramic and

plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745-2-1:

Sound pressure level (L

pA) : 82 dB(A)

Sound power level (L

WA) : 93 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745-2-1:

Work mode: impact drilling into concrete

Vibration emission (a

h,ID ) : 13.0 m/s

Uncertainty (K) : 1.5 m/s

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	HP333DZ
Bredde:	66 mm
Dybde:	212 mm
Højde:	193 mm
Vægt:	1100 g
Strømkilde:	Batteri
Maksimal torsion:	28 Nm
Bore diameter, stål (maks.):	10 mm
Bore diameter, træ (maks.):	21 mm
Bore diameter, beton (maks.):	- mm
Boring:	Ja
Slagboring:	Ja
Vurderet hastighed:	1700 rpm
Nominel hastighed (min.):	450 rpm
Slagantal (maks.):	25500
Slagvolumen (min.):	6750