Makita HS7611J Manual

Makita savemaskine HS7611J

Læs gratis den danske manual til Makita HS7611J (12 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Makita HS7611J, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
INSTRUCTION MANUAL
Circular Saw
HS7611
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HS7611
Blade diameter 185 - 190 mm
Max. Cutting depth at 0° 63 - 65 mm
at 45° bevel 44 - 45 mm
No load speed 5,500 min-1
Overall length 311 mm
Net weight 3.9 kg
Safety class /II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• WeightaccordingtoEPTA-Procedure01/2014
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
WasteElectricandElectronicEquipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for performing lengthways and cross-
ways straight cuts and mitre cuts with angles in wood while
inrmcontactwiththeworkpiece.WithappropriateMakita
genuine saw blades, other materials can also be sawed.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For public low-voltage distribution
systems of between 220 V and 250 V
Switching operations of electric apparatus cause volt-
ageuctuations.Theoperationofthisdeviceunder
unfavorable mains conditions can have adverse effects
totheoperationofotherequipment.Withamains
impedance equal or less than 0.33 Ohms it can be pre-
sumed that there will be no negative effects. The mains
socket used for this device must be protected with a
fuse or protective circuit breaker having slow tripping
characteristics.
Noise
The typical A-weighted noise level determined accord-
ingtoEN62841:
Sound pressure level (L
pA):95dB(A)
Sound power level (L
WA):106dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
minedaccordingtoEN62841:
Workmode:cuttingwood
Vibration emission (a
h,W):2.5m/s2 or less
Uncertainty(K):1.5m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

Produkt Specifikationer

Mærke: Makita
Kategori: savemaskine
Model: HS7611J

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita HS7611J stil et spørgsmål nedenfor, og andre brugere vil svare dig


savemaskine Makita Manualer

Makita

Makita 5603 Manual

14 Oktober 2024
Makita

Makita EA3502S Manual

2 Oktober 2024
Makita

Makita DJV140 Manual

2 Oktober 2024
Makita

Makita DJV182RTJ Manual

30 September 2024
Makita

Makita HS301DWAE Manual

30 September 2024
Makita

Makita DSS500RFJ Manual

27 September 2024
Makita

Makita DSS610ZJ Manual

14 September 2024
Makita

Makita 2414EN Manual

7 September 2024
Makita

Makita BSS500RFJ Manual

24 August 2024
Makita

Makita DLM463Z Manual

21 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell

Einhell GE-CS 18 Li Manual

15 Oktober 2024
MSW

MSW -TAS287 Manual

15 Oktober 2024
MSW

MSW T-SAW300 Manual

15 Oktober 2024
FERM

FERM FKS-165 Manual

13 Oktober 2024
Einhell

Einhell TC-AP 650 E Manual

12 Oktober 2024
Einhell

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024
Einhell

Einhell BT-SM 2534 Manual

11 Oktober 2024
Hitachi

Hitachi C 7MFA(LA) Manual

9 Oktober 2024
Ozito

Ozito ECS-406A Manual

6 Oktober 2024
Ferrex

Ferrex DX254TS Manual

5 Oktober 2024