Makita JR3051T Manual

Makita savemaskine JR3051T

Læs gratis den danske manual til Makita JR3051T (8 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Makita JR3051T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

INSTRUCTION MANUAL

Recipro Saw

JR3051T

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: JR3051T

Length of stroke 30 mm

Strokes per minute 0 - 3,000 min-1

Max. cutting capacities Pipe

(with 300 mm blade)

130 mm

Wood

(with 300 mm blade)

255 mm

Overall length 447 mm

Net weight 3.2 - 3.3 kg

Safety class /II

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may differ from country to country.

• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to

EPTA-Procedure 01/2014, are shown in the table.

Symbols

The followings show the symbols used for the equipment.

Be sure that you understand their meaning before use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment together

with household waste material! In observance of

the European Directive, on Waste Electric and

Electronic Equipment and its implementation

in accordance with national law, electric equip-

ment that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility.

Intended use

The tool is intended for sawing wood, plastic, metal and

building materials with a strong impact. It is suitable for

straight and curved cutting.

Power supply

The tool should be connected only to a power supply of the same

voltage as indicated on the nameplate, and can only be operated

on single-phase AC supply. They are double-insulated and can,

therefore, also be used from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-11:

Sound pressure level (LpA) : 88 dB(A)

Sound power level (LWA) : 99 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may also

be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-11:

Work mode: cutting boards

Vibration emission (a

h,B ) : 19.5 m/s

Uncertainty (K) : 1.5 m/s

Work mode: cutting wooden beams

Vibration emission (a

h,WB) 19.5 m/s2

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	savemaskine
Model:	JR3051T

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita JR3051T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Makita Manualer

Makita 5603 Manual

14 Oktober 2024

Makita EA3502S Manual

2 Oktober 2024

Makita DJV140 Manual

2 Oktober 2024

Makita DJV182RTJ Manual

30 September 2024

Makita HS301DWAE Manual

30 September 2024

Makita DSS500RFJ Manual

27 September 2024

Makita DSS610ZJ Manual

14 September 2024

Makita 2414EN Manual

7 September 2024

Makita BSS500RFJ Manual

24 August 2024

Makita DLM463Z Manual

21 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

MSW -TAS287 Manual

15 Oktober 2024

MSW T-SAW300 Manual

15 Oktober 2024

FERM FKS-165 Manual

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024

Ferrex DX254TS Manual

5 Oktober 2024