Makita LH1201FL Manual

Makita savemaskine LH1201FL

Læs gratis den danske manual til Makita LH1201FL (20 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Makita LH1201FL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Table Top Miter Saw

LH1201FL

015122

ENGLISH (Original instructions)

SPECIFICATIONS

Model LH1201FL

Blade diameter 305 mm

Blade body thickness 1.9 mm or less

Hole diameter

For all countries other than European countries 25.4 mm

For European countries 30 mm

Max. Cutting capacities (H x W) with blade 305 mm in diameter in the miter saw mode

Miter angle

Bevel angle 90° 45° (left to right)

95 mm x 155 mm 95 mm x 110 mm

90° 62 mm x 200 mm 62 mm x 135 mm

64 mm x 155 mm 64 mm x 65 mm

45° 40 mm x 200 mm 40 mm x 85 mm

Max. Cutting capacities at 90° in the table saw (bench saw mode) 52 mm

No load speed (min-1) 3,800

Laser Type Red Laser 650 nm, 1 mW (Laser Class 2)

Table size (W x L) 307 mm x 465 mm

Dimensions (L x W x H) 610 mm x 535 mm x 692 mm

Net weight 20.9 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END292-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ To avoid injury from flying debris, keep

holding the saw head down, after

making cuts, until the blade has come

to a complete stop.

･

When using the tool in the miter saw mode,

secure the top table at the topmost position

so that the saw blade never protrudes from

the top surface of the top table.

･ Do not place hand or fingers close to

the blade.

･ For your safety, remove the chips, small

pieces, etc. from the table top before

operation.

･ Always set SUB-FENCE to left position

when performing left bevel cuts. Failure

to do so may cause serious injury to

operator.

･ Never look into the laser beam. Direct

laser beam may injure your eyes.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE060-1

Intended use

The tool is intended for accurate straight cutting and

(only when used as a miter saw on the lower table) miter

cutting in wood.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Produkt Specifikationer

Mærke:	Makita
Kategori:	savemaskine
Model:	LH1201FL

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita LH1201FL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Makita Manualer

Makita 5603 Manual

14 Oktober 2024

Makita EA3502S Manual

2 Oktober 2024

Makita DJV140 Manual

2 Oktober 2024

Makita DJV182RTJ Manual

30 September 2024

Makita HS301DWAE Manual

30 September 2024

Makita DSS500RFJ Manual

27 September 2024

Makita DSS610ZJ Manual

14 September 2024

Makita 2414EN Manual

7 September 2024

Makita BSS500RFJ Manual

24 August 2024

Makita DLM463Z Manual

21 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

MSW -TAS287 Manual

15 Oktober 2024

MSW T-SAW300 Manual

15 Oktober 2024

FERM FKS-165 Manual

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024

Ferrex DX254TS Manual

5 Oktober 2024