Makita LS1040N Manual

Makita savemaskine LS1040N

Læs gratis den danske manual til Makita LS1040N (16 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Makita LS1040N, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Compound Miter Saw
LS1040
LS1040S
012678
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model LS1040 / LS1040S
Blade diameter 255 mm -260 mm
Blade body thickness 1.6 mm - 2.4 mm
Hole diameter
For all countries other than European countries 25.4 mm and 25 mm
For European countries 30 mm
Max. Cutting capacities (H x W) with blade 260 mm in diameter
Miter angle
Bevel angle 0° 45° (left and right)
93 mm x 95 mm 93 mm x 67 mm
0° 69 mm x 135 mm 69 mm x 95 mm
53 mm x 95 mm 49 mm x 67 mm
45° (left) 35 mm x 135 mm 35 mm x 94 mm
No load speed (min-1) 4,600
Dimensions (L x W x H) 530 mm x 476 mm x 532 mm
Net weight 12.4 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END217-3
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ To avoid injury from flying debris, keep
holding the saw head down, after
making cuts, until the blade has come to
a complete stop.
･ Do not place hand or fingers close to the
blade.
･ For your safety, remove the chips, small
pieces, etc. from the table top before
operation.
･ Always set SUB-FENCE to left position
when performing left bevel cuts. Failure
to do so may cause serious injury to
operator.
･ To loosen the bolt, turn it clockwise.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE004-1
Intended use
The tool is intended for accurate straight and miter
cutting in wood. With appropriate saw blades, aluminum
can also be sawed.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
For Model LS1040
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains

Produkt Specifikationer

Mærke: Makita
Kategori: savemaskine
Model: LS1040N

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita LS1040N stil et spørgsmål nedenfor, og andre brugere vil svare dig


savemaskine Makita Manualer

Makita

Makita 5603 Manual

14 Oktober 2024
Makita

Makita EA3502S Manual

2 Oktober 2024
Makita

Makita DJV140 Manual

2 Oktober 2024
Makita

Makita DJV182RTJ Manual

30 September 2024
Makita

Makita HS301DWAE Manual

30 September 2024
Makita

Makita DSS500RFJ Manual

27 September 2024
Makita

Makita DSS610ZJ Manual

14 September 2024
Makita

Makita 2414EN Manual

7 September 2024
Makita

Makita BSS500RFJ Manual

24 August 2024
Makita

Makita DLM463Z Manual

21 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell

Einhell GE-CS 18 Li Manual

15 Oktober 2024
MSW

MSW -TAS287 Manual

15 Oktober 2024
MSW

MSW T-SAW300 Manual

15 Oktober 2024
FERM

FERM FKS-165 Manual

13 Oktober 2024
Einhell

Einhell TC-AP 650 E Manual

12 Oktober 2024
Einhell

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024
Einhell

Einhell BT-SM 2534 Manual

11 Oktober 2024
Hitachi

Hitachi C 7MFA(LA) Manual

9 Oktober 2024
Ozito

Ozito ECS-406A Manual

6 Oktober 2024
Ferrex

Ferrex DX254TS Manual

5 Oktober 2024