Makita LXPH03Z Manual

Makita Boremaskine LXPH03Z

Læs gratis den danske manual til Makita LXPH03Z (32 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Makita LXPH03Z, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
Cordless Hammer Driver Drill
Perceuse Percussion-
V
isseuse sans
Fil
Rotomartillo Atornillador
Inalámbrico
LXPH03
012713
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model LXPH03
Drilling into concrete 16 mm (5/8")
Drilling into steel 13 mm (1/2")
Drilling into wood 76 mm (3")
Fastening wood screw 10 mm x 90 mm (3/8" x 3-1/2")
Capacities
Fastening machine screw 6 mm (1/4")
High (2) 0 - 2,000 /min.
No load speed (RPM) Low (1) 0 - 400 /min.
High (2) 0 - 30,000 /min.
Blows per minute Low (1) 0 - 6,000 /min.
Overall length 225 mm (8-7/8")
Net weight 2.3 kg (5.1 lbs)
Rated voltage D.C. 18 V
Standard battery cartridge BL1830
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions

Produkt Specifikationer

Mærke: Makita
Kategori: Boremaskine
Model: LXPH03Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita LXPH03Z stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine Makita Manualer

Makita

Makita DHP489 Manual

11 August 2025
Makita

Makita HR007G Manual

15 Juli 2025
Makita

Makita HR3011FC Manual

9 Juli 2025
Makita

Makita DP4021 Manual

8 Juli 2025
Makita

Makita HR008G Manual

8 Juli 2025
Makita

Makita HK1820L Manual

8 Juli 2025
Makita

Makita DP4020 Manual

8 Juli 2025
Makita

Makita HR2450F Manual

8 Juli 2025
Makita

Makita HR2670FT Manual

8 Juli 2025
Makita

Makita HR2450 Manual

28 Marts 2025

Boremaskine Manualer

Nyeste Boremaskine Manualer

Milwaukee

Milwaukee M18 2615-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2904-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2903-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 2607-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2811-20 Manual

13 August 2025
Bosch

Bosch GBH 18 V-26 Manual

13 August 2025
Milwaukee

Milwaukee M18 2801-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 3404 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2809-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2807-20 Manual

12 August 2025