Makita M3601 Manual

Makita Fræsningsmaskine M3601

Læs gratis den danske manual til Makita M3601 (12 sider) i kategorien Fræsningsmaskine. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Makita M3601, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Router

M3601

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: M3601

Collet chuck capacity 6 mm, 1/4″ and/or 8 mm

Plunge capacity 0 - 35 mm

No load speed 27,000 min-1

Overall height 218 mm

Net weight 2.7 kg

Safety class /II

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for ush trimming and proling of

wood, plastic and similar materials.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (LpA) : 91 dB(A)

Sound power level (LWA) : 102 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Work mode: cutting grooves in MDF

Vibration emission (a

h) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

Makita declares that the following Machine(s):

Designation of Machine: Router

Model No./ Type: M3601

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents: EN60745

The technical le in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.8.2015

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Produkt Specifikationer

Mærke:	Makita
Kategori:	Fræsningsmaskine
Model:	M3601

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita M3601 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fræsningsmaskine Makita Manualer

Makita RP2300FCX Manual

5 August 2023

Makita RP1110CJ Manual

7 Maj 2023

Makita M3601 Manual

24 Marts 2023

Makita DRT50ZJX2 Manual

16 December 2022

Makita DCO180ZJ Manual

27 November 2022

Makita 3601B Manual

21 November 2022

Makita RP1800F Manual

8 November 2022

Makita SG1250 Manual

4 November 2022

Makita RP2300FC Manual

28 Oktober 2022

Makita M3700 Manual

21 Oktober 2022

Fræsningsmaskine Manualer

Nyeste Fræsningsmaskine Manualer

31 Maj 2025

31 Maj 2025

31 Maj 2025

29 Juli 2024

Bosch GKF 18V-8 Professional Manual

30 Juni 2024

Proxxon GG12 Manual

17 April 2024

Gardena EH 600/36 Manual

15 Februar 2024

Carat SL-1255 Manual

30 December 2023

Hitachi M8V2 Manual

8 December 2023

DeWalt D26204K Manual

3 December 2023