Makita M8700 Manual


Læs gratis den danske manual til Makita M8700 (24 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Makita M8700, eller vil du spørge andre brugere om produktet?

Side 1/24
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
Rotary Hammer
Marteau Perforateur
Martillo Rotativo
M8700
015488
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model M8700
Concrete 22 mm (7/8")
Core bit 54 mm (2-1/8")
Diamond core bit (dry type) 65 mm (2-9/16")
Steel 13 mm (1/2")
Capacities
Wood 32 mm (1-1/4")
No load speed (RPM) 0 - 1,100 /min
Blows per minute 0 - 4,350
Overall length 362 mm (14-1/4")
Net weight 2.5 kg (5.6 lbs)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
GEA008-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.


Produkt Specifikationer

Mærke: Makita
Kategori: Boremaskine
Model: M8700
Bredde: 71 mm
Dybde: 362 mm
Højde: 194 mm
Vægt: 2600 g
Produktfarve: Black,Orange
Ledningslængde: 4 m
Borepatron type: SDS-plus
Indgangseffekt: 710 W
Strømkilde: Vekselstrøm
Tomgang (maks.): 1100 rpm
Lydeffektniveau: 101 dB
Lydtryksniveau: 90 dB
Usikkerhed i lydniveauet: 3 dB
Omvendt: Ja
Bore diameter, stål (maks.): 13 mm
Bore diameter, træ (maks.): 32 mm
Bore diameter, beton (maks.): 20 mm
Boring: Ja
Energi ved slagkraft: 1.9 J
Slagkraft: 4350 bpm or slag i minuttet
Hjælpehåndtag: Ja
Spændepatron: Ja
Optimale antal apparater i beton: 6 - 14 mm

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita M8700 stil et spørgsmål nedenfor, og andre brugere vil svare dig