Makita M9203 Manual

Makita Rysteplaster M9203

Læs gratis den danske manual til Makita M9203 (8 sider) i kategorien Rysteplaster. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Makita M9203, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

INSTRUCTION MANUAL

Finishing Sander

M9203

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: M9203

Pad size 92 mm x 185 mm

Abrasive paper size 93 mm x 228 mm

Orbits per minute 12,000 min-1

Overall length 252 mm

Net weight 1.4 kg

Safety class /II

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Weight according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for the sanding of large surface of

wood, plastic and metal materials as well as painted

surfaces.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (LpA) : 75 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Work mode: sanding metal plate

Vibration emission (a

h) : 5.0 m/s2

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

Makita declares that the following Machine(s):

Designation of Machine: Finishing Sander

Model No./ Type: M9203

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents: EN60745

Thetechnicalleinaccordancewith2006/42/ECis

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

21.8.2015

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Produkt Specifikationer

Mærke:	Makita
Kategori:	Rysteplaster
Model:	M9203
Vekselstrømsindgangsspænding:	230 V
Bredde:	92 mm
Dybde:	252 mm
Højde:	154 mm
Vægt:	1400 g
Strøm:	190 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	12000 rpm
Soft greb:	Ja
Kabellængde:	2 m
Lydtryksniveau:	75 dB
Vibrationsudledning:	5 m/s²
Usikkerhed i lydniveauet:	3 dB
Tomgangssvingningshastighed (maks.):	24000 OPM
Slibesål, størrelse:	93 x 185 mm
Usikkerhed - k:	1.5 m/s²
Maksimal papirstørrelse:	93 x 228 mm
Slibesål type:	Bånd slibemaskine
Fastgørelse af slibemedier:	Klemme