Makita PH02X2 Manual

Makita Boremaskine PH02X2

Læs gratis den danske manual til Makita PH02X2 (28 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Makita PH02X2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

Cordless Hammer Driver Drill

Perceuse Percussion-Visseuse

sans Fil

Rotomartillo Atornillador

Inalámbrico

PH01

PH02

IMPORTANT: Read Before Using.

IMPORTANT : Lire avant usage.

IMPORTANTE: Lea antes de usar.

2 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model PH01 PH02

Capacities Masonry 10 mm (3/8") 13 mm (1/2")

Steel 10 mm (3/8") 13 mm (1/2")

Wood 25 mm (1") 36 mm (1-7/16")

Wood screw 5.1 mm x 63 mm

(13/64" x 2-1/2")

6 mm x 75 mm (1/4" x 2-15/16")

Machine screw 6 mm (1/4")

No load speed (RPM) High (2) 0- 1,400 /min

Low (1) 0 - 400 /min

Blows per minute High (2) 0 - 21,000

Low (1) 0 - 6,000

Overall length 216 mm (8-1/2") 246 mm (9-11/16")

Net weight 1.5 kg (3.3lbs) 1.7 kg (3.8lbs)

Rated voltage D.C. 14.4 V D.C. 18 V

Standard battery cartridges BL1411G / BL1413G /

BL1415G

BL1811G / BL1813G /

BL1815G

• Due to our continuing programme of research and development, the specications herein are subject to change

without notice.

• Specications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instruc-

tions. Failure to follow the warnings and instructions may

result in electric shock, re and/or serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit inter-

rupter (GFCI) protected supply. Use of an GFCI

reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

power tools may result in serious personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your nger on the switch or energising power tools

that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	PH02X2
Bredde:	239 mm
Dybde:	83 mm
Højde:	240 mm
Vægt:	1700 g
Strømkilde:	Batteri
Tomgang (min.):	400 rpm
Tomgang (maks.):	1400 rpm
Justerbar hastighed:	Ja
Produktdesign:	Pistolgreb boremaskine
Maksimal torsion:	42 Nm
Borepatron, kæbe breddee (maks.):	- mm
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	36 mm
Påvirkningshastighed (lav hastighed):	6000 bpm or slag i minuttet
Effekt hastighed (høj hastighed):	21000 bpm or slag i minuttet
Bore diameter, beton (maks.):	13 mm
Justerbart drejningsmoment:	Ja
Boring:	Ja
Skruearbejde:	Ja
Slagboring:	Ja
Drejningsmoment (min.):	24 Nm