Makita SP6000J1X Manual

Makita savemaskine SP6000J1X

Læs gratis den danske manual til Makita SP6000J1X (40 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Makita SP6000J1X, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/40
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
Plunge Cut Circular Saw
Scie circulaire pour coupe en
plongée
Sierra circular de corte de cavidad
SP6000
007654
2
ENGLISH
SPECIFICATIONS
Model SP6000
Blade diameter 165 mm (6-1/2")
at 90° 56 mm (2-3/16")
at 45° 40 mm (1-9/16") Max. cutting depth
at 48° 38 mm (1-1/2")
No load speed (RPM) 2,000 - 5,200/min
Overall length 341 mm (13-3/8")
Net weight 4.4 kg (9.7 lbs)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
GEA001-3
GENERAL SAFETY RULES
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
Personal Safety
9. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
10. Use safety equipment. Always wear eye
protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
11. Avoid accidental starting. Ensure the switch is
in the off-position before plugging in. Carrying
power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.
12. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
13. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
14. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
15. If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly used.
Use of these devices can reduce dust-related
hazards.

Produkt Specifikationer

Mærke: Makita
Kategori: savemaskine
Model: SP6000J1X

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita SP6000J1X stil et spørgsmål nedenfor, og andre brugere vil svare dig


savemaskine Makita Manualer

Makita

Makita 5603 Manual

14 Oktober 2024
Makita

Makita EA3502S Manual

2 Oktober 2024
Makita

Makita DJV140 Manual

2 Oktober 2024
Makita

Makita DJV182RTJ Manual

30 September 2024
Makita

Makita HS301DWAE Manual

30 September 2024
Makita

Makita DSS500RFJ Manual

27 September 2024
Makita

Makita DSS610ZJ Manual

14 September 2024
Makita

Makita 2414EN Manual

7 September 2024
Makita

Makita BSS500RFJ Manual

24 August 2024
Makita

Makita DLM463Z Manual

21 August 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell

Einhell GE-CS 18 Li Manual

15 Oktober 2024
MSW

MSW -TAS287 Manual

15 Oktober 2024
MSW

MSW T-SAW300 Manual

15 Oktober 2024
FERM

FERM FKS-165 Manual

13 Oktober 2024
Einhell

Einhell TC-AP 650 E Manual

12 Oktober 2024
Einhell

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024
Einhell

Einhell BT-SM 2534 Manual

11 Oktober 2024
Hitachi

Hitachi C 7MFA(LA) Manual

9 Oktober 2024
Ozito

Ozito ECS-406A Manual

6 Oktober 2024
Ferrex

Ferrex DX254TS Manual

5 Oktober 2024