Makita TW0200 Manual

Makita Slagnøgler TW0200

Læs gratis den danske manual til Makita TW0200 (8 sider) i kategorien Slagnøgler. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Makita TW0200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Impact Wrench

TW0200

003995

ENGLISH (Original instructions)

SPECIFICATIONS

Model TW0200

Standard bolt M10 - M16

Capacities High tensile bolt 10 mm - 12 mm

Square drive 12.7 mm

No load speed (min-1) 0-2,200

Impacts per minute 0-2,200

Max. fastening torque 200 N.m

Overall length 251 mm

Net weight 2.2 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE036-1

Intended use

The tool is intended for fastening bolts and nuts.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 93 dB(A)

Sound power level (L

WA) : 104 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG205-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : impact tightening of fasteners of the

maximum capacity of the tool

Vibration emission (ah) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-13

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Impact Wrench

Model No./ Type: TW0200

Produkt Specifikationer

Mærke:	Makita
Kategori:	Slagnøgler
Model:	TW0200
Vægt:	2100 g
Produktfarve:	Blue, Grey
Produkttype:	Momentnøgle
Strømkilde:	Batteri
Tomgang (maks.):	2200 rpm
Soft greb:	Ja
Omvendt:	Ja
Maksimal torsion:	200 Nm
Slagkraft:	2200 bpm or slag i minuttet
Drev størrelse:	1/2 "
Skruediameter:	M10, M12, M14, M16