Makita TW0250 Manual


Læs gratis den danske manual til Makita TW0250 (8 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Makita TW0250, eller vil du spørge andre brugere om produktet?

Side 1/8
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Impact Wrench
TW0250
009625
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model TW0250
Standard bolt M10 - M20
Capacities High tensile bolt M10 - M14
Square drive 12.7 mm
No load speed (min-1) 0-2,300
Impacts per minute 0-2,300
Max. fastening torque 250 N.m
Overall length 251 mm
Net weight 2.2 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE036-1
Intended use
The tool is intended for fastening bolts and nuts.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 93 dB(A)
Sound power level (L
WA) : 104 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 11.0 m/s2
Uncertainty (K) : 2.0 m/s2
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).


Produkt Specifikationer

Mærke: Makita
Kategori: Skruemaskine
Model: TW0250

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita TW0250 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skruemaskine Makita Manualer

Makita

Makita DTL063 Manual

31 Marts 2025
Makita

Makita DDF446RTJ Manual

22 December 2024
Makita

Makita DDA350Y1J Manual

22 December 2024
Makita

Makita 6906J Manual

4 Oktober 2024
Makita

Makita DTW300Z Manual

3 Oktober 2024
Makita

Makita DTW180RTJ Manual

2 Oktober 2024
Makita

Makita TW001GD202 Manual

24 September 2024
Makita

Makita DFL125FZ Manual

22 September 2024
Makita

Makita BTD062Z Manual

20 September 2024
Makita

Makita DTD154Z Manual

15 September 2024

Skruemaskine Manualer

Nyeste Skruemaskine Manualer