Makita TW1000 Manual

Makita Slagnøgler TW1000

Læs gratis den danske manual til Makita TW1000 (8 sider) i kategorien Slagnøgler. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Makita TW1000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Impact Wrench

TW1000

006015

ENGLISH (Original instructions)

SPECIFICATIONS

Model TW1000

Standard bolt M22 - M30

Capacities High tensile bolt M22 - M24

Square drive 25.4 mm

No load speed (min-1) 1,400

Impacts per minute 1,500

Max. fastening torque 1000 N.m

Overall length 382 mm

Net weight 8.6 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE036-1

Intended use

The tool is intended for fastening bolts and nuts.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 103 dB(A)

Sound power level (L

WA) : 114 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : impact tightening of fasteners of the

maximum capacity of the tool

Vibration emission (ah) : 17.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

Produkt Specifikationer

Mærke:	Makita
Kategori:	Slagnøgler
Model:	TW1000
Type:	Forbundet med ledning
Vægt:	8600 g
Produktfarve:	Grøn
Produkttype:	Momentnøgle
Indgangseffekt:	1200 W
Strømkilde:	Vekselstrøm
Soft greb:	Ja
Omvendt:	Ja
Maksimal torsion (hårde applikationer):	1000 Nm
Slagkraft:	1500 bpm or slag i minuttet
Skruediameter:	M22, M24, M30